Experienced Basement Waterproofing & Foundation Repair Company in Chaska, MN

A homeowner in Avon, MN was concerned with the condition of his main floors when he began to notice them sagging. He knew this couldn't be a good sign for the strength of his home's foundation and wanted to find a professional that could inspect the area for him. He began researching companies that could help him out and came across the American Waterworks website. Our FREE no-obligation estimates were intriguing to him, and he signed up for his own with one of our Design Specialists. The homeowner was later greeted by Shane Nephew who carried out a detailed inspection of the crawl space below the sagging floors. Shane knew what the next best step was for the space and recommended our SmartJacks floor support system for the crawl space to provide support and stability to the worn-down floor beams. The homeowner was happy to hear that something could be done to fix the problem and agreed to the project plans. Our Foreman, Jeremiah Fischer, and his crew went to the site to carry out the installations and started by prepping the crawl space area. They drilled a hole and filled it with tightly compacted crushed stone to support the aluminum base for the SmartJacks. Next, they sized the steel column to fit the dimensions of the home and adjusted it to tighten in place. The crew finished by cleaning up their materials and left the home, now with a stronger support for the floors. The homeowner was pleased with the crew's hard work and glad he had contacted us for our services.

Curious about your crawl space's condition? We've got your back! Start by scheduling your FREE estimate appointment today.

A homeowner in Chaska, MN, grew very concerned over the status of their sidewalk. Knowing this was not a do-it-yourself fix, the homeowner began looking for professional assistance. After asking a Facebook group, they noticed the same company kept getting brought up, American Waterworks. The homeowner took a closer look at all the services we offer and knew we were the company for their project. Since they were already on the website, the homeowner signed up for their FREE estimate. Soon after the estimate was set, we sent one of our Design Specialists, Dylan, to the home. Dylan began his detailed inspection of the concrete and noticed the sidewalk was suffering the most. Once he completed the detailed estimation, Dylan determined the sidewalk was sinking into the ground. Dylan recommended lifting and leveling the sidewalk and the homeowner agreed. After earning approval, our Foreman, Reese, and his crew were assigned to complete the project. Once Reese and his crew arrived, they began the PolyLevel installation. The PolyLevel is our polyurethane foam injection solution. The crew installs the PolyLevel by strategically drilling small 5/8" holes into the slab. Next, the crew installs injection ports in the small holes. Then, the polyurethane foam is injected beneath the concrete to fill the voids and raise the slab. Finally, the crew sealed the holes and control joints. After the walkways were lifted, the crew shifted their focus to replacing the joints on the patio. To replace these joints, the crew used the NexusPro Joint Sealant, a silicone-based sealant. First, the crew drilled, smoothed, and prepared the cracks with a non-absorbent backer rod filler. Then, the NexusPro sealant is inserted into the prepared crack or control joint. Finally, the cracks are detailed with a thin layer of native sand, giving the concrete a uniform, finished appearance. As soon as they completed the NexusPro installation, the crew cleaned up their materials and left the home. The homeowner was relieved to know their sidewalk was properly repaired. If you are suffering from a similar issue, sign up for your FREE estimate. 

Brian H. in Chaska, MN realized that his front steps had sunk almost two inches over the last couple of years. He began to research options to repair his concrete and his discovered American Waterworks. He was interested in learning more about our PolyLevel concrete repair solution, so we sent a Design Specialist to his home to give him a FREE estimate and provide a solution. 

PolyLevel is a polymer foam that expands and hardens when injected underneath the concrete. As it expands, it raises the concrete. Our PolyLevel experts inject a precise amount of foam into multiple holes in the concrete to lift and level it back to its original position. Brian chose to use our PolyLevel option to repair his concrete. The process only took a couple of hours and he was amazed at the transformation. PolyLevel is a more affordable, faster and durable option compared to traditional concrete repair.