Expert Basement Waterproofing Company Serving Fillmore County

Lynn T. in Preston, MN had multiple sunken concrete slabs on her driveway, making it a very uneven surface. She was frustrated with how bumpy her driveway was when she drove over it and she was concerned that some of the slabs had sunken so far that it was becoming a trip hazard. She had heard about American Waterworks through a friend and was interested to learn more about our PolyLevel concrete repair solution. Design Specialist, Don Mancilman, went onsite to do a free estimate and he developed a plan to raise and level Lynn's concrete. 

The PolyLevel injection is a faster, more affordable and durable option for concrete repair. From start to finish, the project only took a couple of hours, and Lynn was pleased with how quickly she saw the results. American Waterworks was able to fully restore her driveway to the level surface it once was. 

According to the World Health Organization, radon causes 15% of the world's lung cancer cases and kills 20,000 people each year. Missy S. in Spring Valley, MN learned about the dangers of radon, so she chose to have her home tested by American Waterworks. The test results did in fact show a high level of radon, so American Waterworks took the time to walk Missy through the radon mitigation installation process and answer any of her questions. Missy wanted to act quickly so her family's health would no longer be compromised so she had the system installed as soon as possible. 

Our crew drilled a hole through the floor in the basement to insert a PVC pipe and create a suction point for the radon gas. Then the gas is vented through the pipe and out of the home. A fan is also installed at the top of the PVC pipe where the gas is vented out to ensure that the gas is pushed away from the home. Missy now has peace of mind knowing that her family is protected from this dangerous gas.

When Art B. in Plainview, MN learned that radon causes 15% of the worlds lung cancer cases and kills over 20,000 people each year, he realized he was long overdue to have his home tested for radon. He contacted American Waterworks to have his home tested.

The results showed that his home had dangerous levels of radon so after our Design Specialist, Mac Cole, explained our radon mitigation system and the process, Art decided he needed to have it installed as soon as possible. 

During the installation, our crew drilled a hole through the floor in his basement to insert a PVC pipe and create a suction point for the radon gas. Then the gas is vented through the pipe and out of the home. A fan is also installed at the top of the PVC pipe where the gas is vented out to ensure that the gas is pushed away from the home. Art now has peace of mind knowing that he and his family are protected from this dangerous gas.

Myron S. in Peterson, MN was experiencing water seeping into his basement. The water had started pooling and had nowhere to go. He was concerned about the damage this could cause and that water would keep coming in with each rainfall. He came across an advertisement for American Waterworks in the local newspaper and was pleased to find that we are experts in waterproofing.

He contacted us to set up a FREE estimate, so we sent a Design Specialist to his home to evaluate the situation. Our Design Specialist determined that Myron would benefit from our WaterGuard drainage system and our SuperSump sump pump. Myron felt that our recommendation was the best plan for him, so he decided to move forward with the installation. 

Our production team installed 30 feet of WaterGuard along the perimeter of his basement floor, which guides water to the SuperSump sump pump. The sump pump then pumps the water from the home through the discharge line to the outside, keeping his basement dry. Myron also chose to have a battery backup installed to give him even more peace of mind. Myron can rest easy knowing that he chose a permanent waterproofing solution to protect his home.

Adam W. in Mabel, MN had a cracked basement wall that had gotten worse over the course of just a few months. His block foundation had a large horizontal crack and it was starting to bow. He was concerned about the pressure it was putting on the foundation of his home, so he gave American Waterworks a call for a free estimate. We sent one of our Design Specialists, Michael Radosevich, to inspect Adam’s foundation problem and to design a solution. Michael answered Adam’s questions and addressed his concerns before designing a unique proposal that would best fit his needs. Adam was pleased with the proposal that Michael presented to him, so they scheduled a date for the installation.

Our production team installed 4 wall anchors through the cracked wall in his basement. The anchor rods are drilled deep into the soil out side of the home and wall plates are installed on either end of the rod to secure the anchor. Then, they tighten the anchor which begins the process of straightening the wall. Our wall anchors permanently stabilized Adam’s foundation wall, and our anchors are backed by a lifetime warranty, so Adam can rest easy knowing that he chose the right solution to repair his foundation.

Rick D. in Fountain, MN had a garage apron that had sunk about two inches over time. He was concerned for the safety of his family because it had become a trip hazard. After researching concrete repair options, he decided to contact American Waterworks because he was interested in learning more about our PolyLevel concrete repair solution. We sent a Design Specialist to his home to inspect his concrete first-hand and design the right solution for his needs. Our Design Specialist explained that PolyLevel is a polymer foam that we inject into the concrete, which causes the concrete to be raised as the foam expands and hardens. PolyLevel is more efficient and cost-effective than traditional concrete repair, so Rick chose to move forward with the injection.

Our concrete repair experts drilled small holes into the concrete apron and then injected the polymer foam. They repeated this process a couple of times until the concrete was even with the garage floor and the rest of the driveway. They filled back the holes with concrete and then sealed the cracks in the concrete with our NexusPro sealant. This sealant protects the concrete and gives it a nice, finished look. The process only took a couple of hours, and now Rick can enjoy beautiful, level concrete for years to come!

Jon N. in Canton, MN was tired of the sunken sidewalk next to his home. It was a trip hazard for him and his family, as well as others in the neighborhood. Jon voiced his frustration about his concrete to a friend and they recommended he contact American Waterworks to get a free estimate. We sent a Design Specialist to his home to inspect his concrete in person and to design the right solution. Jon was impressed with our PolyLevel foam solution and was glad to learn that it is less invasive, more effective and more affordable than traditional concrete repair, so he scheduled the installation.

One of our concrete repair experts, Brandon Wiskow, drilled small holes into the concrete slabs and injected the polymer foam until the slabs were raised and leveled. He filled back the holes with concrete and cleaned his work area. Jon was pleased with the result and was glad he could use his concrete just 30 minutes after the installation! The process took half a day to complete, but now Jon can enjoy safe concrete for years to come.

Norbert in Ostrander, MN had water leaking into his basement. They decided to contact American Waterworks because they wanted a long-term, reliable fix. One of our Design Specialists, Pete Wangen went onsite to inspect the basement and provide them with a FREE estimate. They were impressed with our waterproofing system and the plan that Pete developed, so he decided to move forward with the installation.

Our production crew started the installation by removing the concrete around the perimeter of the basement floor to create a trench for the WaterGuard drainage system and the SuperSump sump pump. Once the drainage system and sump pump were put in place, they filled back the gaps with rock and replaced the concrete. Water now properly flows through the drainage system into the sump pump, and from there the water is expelled from the home through the discharge line. Since the installation, Norbert has been able to enjoy a dry, healthier basement!

Patty from Lanesboro, MN had water leaking into her basement. She contacted American Waterworks to learn more about our waterproofing solutions, so we sent a Design Specialist to her home to inspect her basement, develop a solution and provide her with a free estimate. She was impressed with our products and decided we were the right fit for her needs.

Our production crew started the installation of our waterproofing system by removing the concrete around the perimeter of her basement floor to create a trench. They installed a TripleSafe sump pump, which is our most reliable sump pump system, and then they laid our WaterGuard drainage system in the trench. Water now properly drains through the drainage system, into the sump pump, and from there it is expelled from the home through the discharge line. The installation only took two days to complete, and now Patty is enjoying a dry, healthier basement!

A homeowner in Harmony, MN, investigated if water snuck into their basement after a heavy rain storm. During their investigation, the homeowner came across water stains and damp spots throughout their basement. Nervous this would cause long-term damage, the homeowner knew they needed to have an expert investigate. Since they had done previous work with us, the homeowner called our Appointment Center and signed up for their FREE estimate. After the appointment was approved, the homeowner awaited the arrival of one of our Service Technicians, Clay. After Clay arrived at the home, he began his thorough investigation. Clay found that the water was seeping near the basement footing, so he came up with a suggested plan that would eliminate the water damage risk. The homeowner agreed with Clay's suggested plan, and production preparation began. Our Foreman, Raul, and his crew traveled to the home and prepared the basement for production. First, the crew dug and placed the WaterGuard around the perimeter of the basement. The WaterGuard system is our patented below-floor drain that rests in a drainage bed on top of the foundation footing. The WaterGuard is mainly used as a drain system due to its resistance to water clogs, easy access ports, and ability to collect leaking water. The crew dug channels around the perimeter of the basement and then placed the WaterGuard in those channels. Once the WaterGuard was installed, the crew took out the old sump pump and replaced it with our TripleSafe sump pump. Next, the crew went outside and installed the IceGuard on the discharge line. Finally, the crew attached the Foamax, foam insulation panel that reduces condensation for exceptional moisture protection. After all the products were successfully installed, the crew cleaned up their materials and left the home. The homeowner was glad to know their basement was safe from future flooding. If you have a damp basement, sign up for your FREE estimate today! 

A homeowner in Preston, MN, knew they needed to have their basement evaluated after seeing their basement leaking water. Knowing it wasn't going to be a do-it-yourself project, the homeowner wanted to have a professional waterproofing company perform an inspection. After doing a quick online search, the homeowner decided to sign up for their FREE estimate. We sent Ryan, one of our Design Specialists, to investigate the homeowner's concerns. Once Ryan arrived, he introduced himself to the homeowner and began evaluating the status of the basement. After completing the estimate, Ryan confirmed that the basement's waterproofing products needed an update. Ryan recommended installing a new drain system and sump pump. The homeowner knew this was their best option, so they agreed with Ryan's recommendations. The plans were sent to our Foreman, Jesus, and his crew. Once Jesus and the crew arrived, they began prepping the basement for the WaterGuard installation. The WaterGuard is a below-floor drain that rests in a bed of drainage stone on top of the foundation footing. The crew installs the WaterGuard by digging channels around the perimeter of the basement floor. Once the channels are dug, the crew can go ahead and place the drainage stone in the channels. The WaterGuard is then placed on top of the stone and covered with cement. After the WaterGuard was installed, the crew took out the old sump pump and replaced it with the TripleSafe sump pump. To connect the TripleSafe to the WaterGuard, the crew installed a feedline across the foundation floor. Next, the crew mechanically attached CleanSpace to the basement walls. CleanSpace is a 100% waterproof plastic vapor barrier that is ideal for foundation walls. The crew installed the IceGuard, an anti-freeze fitting, on the outside discharge line. As soon as the IceGuard was installed, the crew put the basement back together. After seeing the crew's wonderful work, the homeowner left a kind review on our website. If you are suffering from a similar issue, sign up for your FREE estimate today!

A homeowner in Canton, MN, was growing distressed about discovering their driveway was slowly worsening. Knowing this was not a do-it-yourself project, the homeowner looked into concrete leveling services near them. After a quick search, the homeowner came across our high ratings and reviews. The homeowner was impressed by our reviews, so they decided to follow through with a FREE estimate. Nate, one of our Design Specialists, was sent to complete the inspection. Nate arrived at the home and began looking into the homeowner's concerns. Once he completed his detailed walk-through, he discovered the driveway was sinking due to soil settlement. Nate recommended lifting the garage apron, walkway, and northwest concrete slabs. Additionally, he recommended filling the cracks with NexusPro, a silicone-based sealant. Knowing this was their best option, the homeowner agreed. After being approved by the homeowner and the office, the plans were sent to our Foreman, Dylon, and his crew. Dylon and his crew traveled to the home to begin production. Once they arrived, the crew focused on lifting the sinking concrete with PolyLevel, a polyurethane foam injection solution. The crew installed the PolyLevel by strategically drilling small holes throughout the concrete. Next, injection ports are installed in those small holes. Then, the polyurethane foam is injected beneath the concrete to fill the voids and raise the slab. Finally, the holes and control joints are sealed. The crew shifted their focus to filling the cracks throughout the driveway and walkway with NexusPro Crack Repair. After all the cracks were repaired, the crew cleaned up their materials and left the home. If you are suffering from a similar issue, sign up for your FREE estimate today! 

In Harmony, MN a homeowner was upset with how much her driveway had sunk over the years. It had created a large bump between the concrete and the garage floor and every time she drove in and out her car would hit it. She wanted to find a solution sooner than later and eliminate the bump problem and restore the driveway space. Going online to find a company with concrete repair services, she came across our website because of our American Waterworks reviews from past customers. She decided to schedule a FREE estimate with us to learn more before agreeing to any project plans. We sent over one of our Design Specialists to the home where he inspected the driveway and prepared his recommendations. He informed the homeowner of our quality products for concrete, and she quickly became interested and agreed to the installation of some to get her driveway fully repaired. The plans were approved and sent to one of our Foremen, Dylon VanCanneyt and his crew to first install our PolyLevel foam. They drilled small holes throughout the driveway, inserted ports through the holes, and injected the solution inside until the concrete slabs were fully lifted back up and gap was gone. Later, another one of our Foremen, Ryan Trogstad, went to the site to carry out the installation of the other two products. He filled in the empty joints with NexusPro sealant and spread a thin layer of SealantPro on top of the entire driveway to prevent any flaking or discoloration from occurring. The homeowner was thrilled with the look of her driveway and relieved to have the bump gone for good.

Are you thinking of scheduling repairs for your driveway? Schedule a FREE estimate with us first to learn more about the process!

A homeowner in Lanesboro, MN, was interested in lifting their dropping driveway and sidewalk. Unsure who to work with, the homeowner began looking into professional concrete repair companies that offer PolyLevel near Lanesboro, MN. One of the first companies to populate was us, American Waterworks. After reviewing our services, the homeowner knew we were the best choice for them. The homeowner called our Appointment Center and signed up for their FREE estimate. Once the estimate was set, we sent one of our Design Specialists, Michel, to the home to begin the project. Michel arrived and started inspecting the damaged concrete. Following his inspection, Michel determined the driveway and patio needed to be lifted and leveled. Michel presented his findings to the homeowner and they agreed with his solution. Next, the plans were passed along to the office to be finalized. After they were finalized, they were sent to our Foreman, Patrick, and his crew to begin the project. Patrick and his crew traveled to the home to begin the PolyLevel installation. Once the crew arrived, they started by installing the PolyLevel underneath the sinking driveway and patio. The PolyLevel is a polyurethane foam injection solution that restores the appearance and safety of the concrete. The crew started by strategically drilling small holes throughout the slab. Then, the crew inserts ports into those small holes. Next, the polyurethane foam is injected beneath the concrete to fill voids and raise the slabs. Finally, the holes and control joints are sealed. Once the PolyLevel injection was finished, the crew could clean up their materials and leave the home. The homeowner was grateful for the excellent work completed by the crew. If you are experiencing a similar issue, sign up for your FREE estimate today! 

A homeowner from Peterson, MN, was walking across his first floor one day when he noticed an area of his floor that seemed to be slopping. The area with trouble was over his crawl space. He didn't want to let any issues go unchecked, so he began looking for crawl space joist support. Eventually, he found our website and signed up for his FREE estimate. A few weeks later our Design Specialist, Chuck H, headed out to the home to see what could be done. 

Chuck completed his inspection, and when he was finished, he recommended the use of our crawl space SmartJack system. The SmartJack® Crawl Space Stabilizer is an adjustable supplemental support system used for sagging crawl spaces. It not only provides supplemental support to your failing structure -- it can also often lift failing floor joists or beams, restoring them to their original position. This crawl space support system is unique in that it's made with strong, corrosion-resistant, galvanized steel. Because your system will not develop rust, it will remain adjustable for years, should you need to perform future adjustments. The homeowner agreed with Chuck's recommendations and the work was scheduled for several weeks later. 

On the day of the project, our Foreman, Luis D, led his team through the installation of 5 of our SmartJacks throughout the crawl space of the home. Now, our customer can rest easy knowing his crawl space is stable and healthy!