Basement Waterproofing, Concrete Lifting & Foundation Repair in Howard County, IA

Joe M. in Chester, IA had water leaking through the walls in his basement. The water was causing damage to his property and had created a musty and unhealthy environment. He decided it was time to find a professional waterproofing contractor to permanently waterproof his basement.

He saw a commercial for American Waterworks and was pleased to see that we are experts in waterproofing. He gave us a call for a FREE estimate, and shortly after we had a Design Specialist out to his home to develop a solution for him. Joe was pleased with the personalized waterproofing plan, so he set a date for the installation. 

Our crew removed the concrete around the perimeter of the basement and installed our WaterGuard drainage system. Next, we installed a SuperSump sump pump which is where the WaterGuard drains to. We also installed our CleanSpace barrier along the basement walls to guide water into the drainage system. Lastly, they replaced the concrete. Joe's basement is now a dry, clean and livable space. He can rest easy knowing his basement will always be protected since our waterproofing system is backed by a lifetime warranty. 

Joe from Lime Springs, IA contacted American Waterworks when he discovered that his foundation walls in his basement had cracked and started bowing inward. One of our Design Specialists went onsite to inspect his foundation and provide him with a free estimate. Our Specialist recommended that we install wall anchors in Joe’s basement to provide permanently stability to his foundation. Joe was pleased with this solution, so he chose to move forward with the installation.

Our production crew started installing the wall anchors by drilling small holes through the block foundation. Then, they inserted long, metal rods through the foundation and into the soil surrounding the home. Next, they secured both ends of the rods by screwing on anchor plates and tightening them as far as they would go. Not only did this process help to straighten Joe’s walls but it provides permanent stability for the foundation. Joe is glad he chose to invest in the long-term protection of his home!

LuRae M. of Elma, IA had water leaking in corner of their basement and needed help as soon as possible. They called American Waterworks to set up a Free Estimate. We sent out one of our Design Specialists, Matt Ryan, to go to their home to diagnose the issue and come up with a solution. After a clear and detailed inspection, LuRae was comfortable with the proposal so they scheduled the installation date.

Our foreman, Austin Lucas, and his production team began the installation by cutting out the concrete perimeter of the basement to form a trench. Next, they installed our CleanSpace Wall System around the wall perimeter to prevent further leaks, mold, or humidity from invading the room. Furthermore, in the corner of the basement, our crew installed our SuperSump Premier Sump Pump System, which is designed to keep basements dry and clean for extended periods of time, with the discharge line ending outside of their home.

Next, our production team installed our WaterGuard System in the formed trench, which serves as an underground drain, prevents any further water clogs, and catches water waste from below the CleanSpace. From the WaterGuard, contaminated water flows to the sump pump, and gets pumped out of the home. To complete the project, Austin and his crew filled the open gaps with rock and replaced the concrete. LuRae was very satisfied with the outcome, the American Waterworks team, and our waterproofing products!   

Adolph and Miriam H. of Protivin, IA had water leaking in their basement so they got in contact with American Waterworks to inspect their problem and come up with a solution for them. After an in-depth inspection with our Design Specialist, Brandon Merrill, Adolph and Miriam were confident with the proposal so they set up a date for installation. 

Our Foreman, Hugo Sanchez, and his production team began the installation by breaking out the concrete perimeter to form a trench. In the trench, our crew installed 103 feet of our WaterGuard System, designed to prevent water clogs and serve as an underground drain. Next, Hugo and his team installed our SuperSump Sump Pump System to the discharge line, which is made to keep basements dry for long periods of time. To complete the project, our team covered the leftover open gaps with rock and replaced the concrete. Adolph and Miriam were thankful we were able to help them in their time of need and no longer have to experience water problems! 

A homeowner in Cresco, IA, disliked the look of the concrete in front of their home. Wanting to solve the issues before the summertime, the homeowner began searching for a solution to their issues. The homeowner went to the Better Business Bureau and looked at the top concrete repair companies near them. While comparing the companies near the, the homeowner's eye was caught by our A+ rating. The homeowner decided to sign up for their FREE estimate by calling our Appointment Center. Once set, the homeowner awaited the arrival of one of our Design Specialists, Michel. After Michel arrived, he greeted the homeowner and started his evaluation of the concrete. After evaluating the concrete, Michel determined that the concrete was sinking due to soil settlement. To stop the sidewalk from sinking further, Michel suggested using the PolyLevel to lift and level the sidewalk. Knowing this was their best option, the homeowner agreed and the plans were sent to the production crew. Our Foreman, Dylon, and his crew traveled to the home to begin the PolyLevel and NexusPro installation. PolyLevel is a polyurethane foam injection solution that restores the appearance and safety of the concrete. The crew started by strategically drilling small holes throughout the slab. Then, the crew inserts ports into those small holes. Next, the polyurethane foam is injected beneath the concrete to fill voids and raise the slabs. Finally, the holes and control joints are sealed. Once the PolyLevel injection was finished, the crew shifted their focus to filling the cracks and replacing the joints. The crew utilized NexusPro Sealant, a silicone-based sealant for joints and cracks formulated to provide long-lasting flexibility and withstand harsh weather conditions. The crew begins by drilling, smoothing, and preparing the non-absorbent backer rod filler. Then, the NexusPro sealant is inserted in the prepared crack or control joint. Finally, the cracks are detailed with a thin layer of native sand, giving the concrete a uniform, finished appearance. After seeing the impressive work done by the crew, the homeowner left a glowing review. If you're concrete needs some repairs, sign up for your FREE estimate today! 

A homeowner in Lime Springs, IA, was concerned with the stability of their garage floor. Since this garage stored heavy-duty farm equipment, the homeowner began searching for a solution for their garage floor. The homeowner asked neighbors for any referrals, and many of them recommended American Waterworks. The homeowner decided to call our Appointment Center and sign up for their FREE estimate. Once set, the homeowner awaited the arrival of one of our Design Specialists, Michel. After Michel arrived, he greeted the homeowner and started his evaluation of the concrete. After evaluating the concrete, Michel determined that the concrete was cracked because it was sinking. To stop the sidewalk from sinking further, Michel suggested using the PolyLevel to lift and level the sidewalk. Knowing this was their best option, the homeowner agreed and the plans were sent to the production crew. Our Foreman, Brandon, traveled to the home to begin the PolyLevel and NexusPro installation. PolyLevel is a polyurethane foam injection solution that restores the appearance and safety of the concrete. The crew started by strategically drilling small holes throughout the slab. Then, the crew inserts ports into those small holes. Next, the polyurethane foam is injected beneath the concrete to fill voids and raise the slabs. Finally, the holes and control joints are sealed. Once the PolyLevel injection was finished, the crew shifted their focus to filling the cracks and replacing the joints. The crew utilized NexusPro Crack Repair, a silicone-based sealant for joints and cracks formulated to provide long-lasting flexibility and withstand harsh weather conditions. The crew begins by drilling, smoothing, and preparing the non-absorbent backer rod filler. Then, the NexusPro Crack Repair is inserted in the prepared crack or control joint. Finally, the cracks are detailed with a thin layer of native sand, giving the concrete a uniform, finished appearance. The homeowner was ecstatic over the job well done by Brandon. If you're concrete needs some repairs, sign up for your FREE estimate today! 

A homeowner in Decorah, IA, was doing chores in their home when they heard an alarming noise. After doing some investigating, the homeowner discovered that the source was coming from their sump pump. Wanting to solve the issue before the spring, the homeowner began searching for a solution. After comparing many companies, the homeowner decided to work with us, American Waterworks. The homeowner went to our website and signed up for their FREE estimate. We sent Brian, one of our Design Specialists, to investigate the sump pump issues. When Brian arrived, he introduced himself to the homeowner and they showed him to the sump pump. Brian determined that the sump pump needed to be replaced. After telling the homeowner of his findings, Brian recommended installing a new sump pump. The homeowners agreed and the plans were sent to our Foreman, Kiko, and his crew. A couple of days later, Kiko and his crew traveled to the home to install the TripleSafe sump pump. When they arrived, Kiko and his crew removed the old sump pump. Next, the TripleSafe was put into the correct place. The TripleSafe is the world's most reliable pumping system that keeps your basement dry with triple the protection of a normal pump. After installing the TripleSafe pump, the crew attached an IceGuard to the discharge line. The IceGuard allows water to escape if the discharge line freezes or becomes blocked. Finally, the crew installed a buried discharge line that connects to the interior sump pump. Once all the required products were installed, Kiko and his crew cleaned up his material and left. The homeowner was put at ease knowing their sump pump was working properly. If you are experiencing a similar issue, sign up for your FREE estimate today! 

A homeowner in Elma, IA was concerned about his driveway when he tripped over the large bump that had formed between it and the garage floor. Upon closer look he noticed that it had sunk about two and a half inches. Surprised at how much it had sunk over the years, he was eager to find a solution sooner than later to prevent any more sinking from happening. Online, he looked for concrete repair services in his area and found the American Waterworks company website. He quickly became impressed with our past jobs completed and the before and after photos that showed the positive results. He decided to sign up for a FREE estimate with us to learn more. Later, one of our Design Specialists went to the home to inspect the driveway and come up with a solution for the space. The Design Specialist determined that our PolyLevel and NexusPro products would be the best way to level and smooth the space again. The homeowner agreed to the plans and was excited to move forward. On the installation day, our Foreman, Troy Johnson, and his crew went to the site and began the project by drilling small holes throughout the driveway. They inserted small ports through the holes to reach the empty space below the slabs and carried out the PolyLevel injection. Once the slabs were all lifted, they filled in the holes and empty joints with NexusPro and spread some native sand on top for a smooth finish. The homeowner was glad to have a bump-free driveway and knew he would recommend our services to friends and family.

If you or someone you know is facing similar problems, get your FREE no-obligation estimate set up with us today!

A homeowner in Cresco, IA, disliked the appearance of their cracked, uneven driveway. Hoping to avoid replacing all of the concrete, the homeowner began looking into concrete repair options near them. The homeowner asked a local Facebook for any recommendations, and several members suggested working with us, American Waterworks. After taking a look at our services, the homeowner knew we were the best company for them. Next, the homeowner called our Appointment Center and signed up for their FREE estimate. Once the estimate was set, the homeowner prepared for the arrival of one of our Design Specialists, Ryan. After Ryan arrived at the home, he began his detailed investigation of the concrete. Following his investigation, Ryan found that the sidewalk and garage floor were sinking due to settlement. Ryan told the homeowner of his findings and also recommended lifting the areas with PolyLevel, our polyurethane foam injection solution. The homeowner knew this was their best option, so they decided to go ahead with the plan. Ryan passed the plans along to our Logistic team and then to our Forman, Troy. Once Troy and his crew received the plans, they traveled to the home to begin the project. The PolyLevel is a polyurethane foam injection solution that restores the appearance and safety of the concrete. The crew started by strategically drilling small holes throughout the slab. Then, the crew inserts ports into those small holes. Next, the polyurethane foam is injected beneath the concrete to fill voids and raise the slabs. Finally, the holes and control joints are sealed. Once the PolyLevel injection was finished, the crew shifted their focus to filling the cracks and replacing the joints. The crew utilized NexusPro Sealant, a silicone-based sealant for joints and cracks formulated to provide long-lasting flexibility and withstand harsh weather conditions. The crew begins by drilling, smoothing, and preparing the non-absorbent backer rod filler. Then, the NexusPro sealant is inserted in the prepared crack or control joint. Finally, the cracks are detailed with a thin layer of native sand, giving the concrete a uniform, finished appearance. Once the project was complete, the crew cleaned up their materials and left the home. The homeowner was thankful for the excellent work completed by the crew. If you are experiencing a similar issue, sign up for your FREE estimate today! 

A homeowner in Calmar, IA, made an unexpected discovery in their basement. Due to the heavy thunderstorm, water snuck into their basement causing wet, muddy floors. The stressed homeowners knew they needed to resolve the issue, so they began looking for the best waterproofing company near them. After looking into "Iowa basement repair", the homeowner came across the 4.9/5 star-rated American Waterworks. The homeowner saw that we offer FREE estimates, so they called our Appointment Center to sign up for theirs. Once the estimate was set, we sent Brady, one of our Iowa-based Design Specialists. Brady arrived at the home and began his thorough investigation of the basement. While inspecting the basement, Brady saw several areas where the water could be sneaking in from. To stop the water intrusion from continuing, Brady suggested fully waterproofing the entire space. The homeowners wanted to solve the issue for good, so they agreed with Brady's recommendations. Next, Brady sent the plans to our Logistics team to build the project. Once the project was built, it was assigned to Juan and his crew to begin production. Juan and his crew traveled to the home to begin the project. First, the crew installed WaterGuard around the entire basement's perimeter. The WaterGuard is a below-floor drain that rests in a bed of drainage stone on top of the foundation footing. The crew installs the WaterGuard by digging channels around the perimeter of the basement floor. Once the channels are dug, the crew can go ahead and place the drainage stone in the channels. The WaterGuard is then placed on top of the stone and covered with cement. Once the WaterGuard is in place, the crew could shift their focus to removing the old sump pump and replacing it with the SuperSump+. The crew installed a feedline across the floor to connect the SuperSump+ to the new WaterGuard. Next, the crew attached CleanSpace to the unfinished basement walls. The CleanSpace is a 100% waterproof plastic vapor barrier that prevents humidity and mold growth. The crew installs CleanSpace by mechanically attaching them to the basement walls with plastic drilled-in fasteners. Once all the products are installed, Juan and his crew clean up their materials and leave the home. The homeowner was in awe of the excellent work completed by the crew. If you are suffering from a similar issue, sign up for your FREE estimate today! 

A homeowner in Cresco, IA, grew distressed after discovering their sump pump was breaking down. Knowing they could not solve this issue, the homeowner began looking into sump pump replacement in Iowa. To their surprise, the highest-rated and top-of-the-list company was us, American Waterworks. Once the homeowner learned we had Design Specialists based in Iowa, they decided to sign up for their FREE estimate. Once the estimate was set, the homeowner waited for the arrival of Ryan, one of our Iowa-based Design Specialists. Ryan arrived at the home and began his thorough investigation of the basement and sump pump. Following his detailed inspection, Ryan confirmed the sump pump required replacement. Ryan recommended installing one of our reliable sump pump systems, the TripleSafe. The homeowner agreed with Ryan's recommendations, so he sent his proposal to our Logistics team to be approved. Once the project was built, the proposal was assigned to our Foreman, Diego, and his crew. After they arrived at the home, Diego and his crew began by taking out the old sump pump and replacing it with the TripleSafe. Our TripleSafe is the most reliable water pumping system on the market. This sump pump will keep your basement dry with triple the protection of a normal sump pump. Once the TripleSafe was secured, the crew shifted their focus to outside the home. First, the crew installed an outside discharge line to ensure the water exits the home properly. Next, the crew attached an IceGuard on the outside discharge line. An IceGuard allows water to escape if the sump pump pipe freezes or becomes blocked for any reason. Once all the products were secured, the crew cleaned up their materials and left the home. The homeowner was delighted with the excellent work completed by the crew. If you notice your sump pump is not running properly, sign up for your FREE estimate today!