Certified Waterproofing, Concrete Lifting & Foundation Repair in Olmsted County, MN

Kay had called American Waterworks and explained that water had been a problem for many years. They had attempted to fix the problem with a sump pump and drain tile, yet they still were taking on water in the spring. After a free onsite inspection with American Waterworks, the customer proceeded with a full perimeter waterproofing system. The patented WaterGuard system and TripleSafe were installed to completely solve the water problems. The basement was finally dry and protected by a lifetime transferable warranty.

Dave P. was experiencing sinking concrete on his driveway and back patio. Both locations of the sinking concrete presented trip hazards, and the back patio was allowing water to pitch towards the house. American Waterworks solved the problem by drilling penny sized holes through the concrete and injecting PolyLevel, a two part polyurethane foam designed to lift and level the concrete. The project took less than one day and the concrete was back to the original position. The driveway could be driven on immediately, and the patio pitched water away from the foundation. 

John R. in Eyota, MN was experiencing water seeping into his basement. Water was pooling on the floor and it had started to cause damage to his property. He knew that if he left this issue alone, he would be in the same position when the next heavy rain came.

He contacted American Waterworks to see how we could help protect his basement. We sent a Design Specialist to his home to give a FREE onsite inspection. Our Design Specialist developed a full basement waterproofing plan that would be a permanent solution for John.

John decided that having his basement fully waterproofed was the best option for him, so we scheduled an installation. Our crew installed a full perimeter of WaterGuard, a TripleSafe sump pump and a discharge line to the outside of his home so the water seeping into his basement can be properly discharged from the home. He has peace of mind that his basement is protected from water for a lifetime. 

Lynn K. in Oronoco, MN had water seeping into her garage and her basement. Her home began to smell musty, and she was worried that the moisture was affecting her air quality and damaging her home. She decided it was time to call the waterproofing experts at American Waterworks to take a look at her situation. We sent our Design Specialist, Jeremy Radtke, to her home to design a solution for her and give her a free estimate. Jeremy listened to her questions and addressed her concerns. He was able to develop a unique and thorough plan that was the most beneficial for her and her home. She was pleased with Jeremy's proposal, so she scheduled the installation.

Our production team installed a full perimeter of WaterGuard in her basement and a partial perimeter in her garage. Next, they installed our TripleSafe sump pump, which has three layers of protection, so she doesn't have to worry about it failing. The WaterGuard drainage system properly guides water to the sump pump. From there, the sump pump pushes the water through the discharge line and expels it from the home. Our top of the line waterproofing system is backed by a lifetime warranty, so Lynn now has peace of mind that her basement is permanently protected. She is glad she invested in protecting one of her most important assets. 

Shannon G. in Oronoco, MN had a large crack in the foundation wall on the back of her garage. She knew that she would be taking a large risk if she chose to wait to repair her foundation, because it could fail at any time, and become a much larger expense. She started researching foundation repair companies when she saw an advertisement for American Waterworks. She decided to call us for a free estimate, so we sent one of our Design Specialists, Rick Weber, to her home to inspect her foundation problem and find a solution. Rick talked her through her options and he developed a plan that was the most beneficial for her and her home. After meeting with Rick and getting her questions and concerns addressed, she felt that we were the best fit for her, so she scheduled a date for the installation.

Our crew installed 4 wall anchors from the outside of her garage into the soil underneath the concrete in the garage. They drilled long rods through the brick until they hit supportive soil. They removed the concrete in the garage where they would need to put on the plates for the anchors. They installed the plates on either end of the rod and tightened the anchors. Lastly, they replaced the concrete and cleaned up their work area. The anchors secure and stabilize the wall. They continue to straighten the walls and can be tightened over time as the wall gradually moves back into place. Our foundation repair systems are guaranteed for a lifetime, so Shannon can rest easy knowing she chose a permanent solution to protect the foundation of her home.

Eric O. in Rochester, MN had a sunken porch that caused a large crack in the brick on the front of his home. Although it wasn’t hindering his foundation yet, it wasn’t aesthetically pleasing, and it bothered him that his porch was uneven. He discovered American Waterworks and was interested to learn more about our concrete repair, so he called us for a free estimate and we sent one of our Design Specialists, Don Mancilman, to his home to assess the situation and find a solution. Don was able to design a plan to raise his stoop which would in turn close the gap in the brick wall. Eric liked Don’s proposal, so they set a date for the concrete to be repaired.

One of our concrete repair experts, Brandon Wiskow, drilled small holes into his porch to inject the PolyLevel foam. Next, he injected the foam until the slab was raised and leveled, which closed the crack in the brick wall. PolyLevel is a faster, durable and more affordable alternative to traditional concrete repair. The process is non-invasive and only took a couple of hours to complete. Eric is glad he found a concrete repair solution that was the right fit for him. He is glad he will now be able to enjoy a raised and level stoop for years to come.

Jennifer E. in Rochester, MN had water leaking into her basement. She was concerned about the damage that it was causing to her home and she was worried that their air quality was compromised, so she contacted American Waterworks to receive a free estimate. We sent one of our Design Specialists, Mike Radosevich, to her home to inspect her basement and design a solution. Mike worked closely with Jennifer to create the right waterproofing plan for her home. Jennifer liked the proposal that Mike presented to her, so she scheduled the installation.

Our Foreman, Hugo Sanchez, and his crew installed our WaterGuard drainage system around the perimeter of the basement. Then, they installed a SuperSump sump pump and our CleanSpace vapor barrier along the wall. The drainage system now properly guides water to the sump pump and from there, the sump pump pushes the water through the discharge line and expels it from the home. Our waterproofing system is backed by a lifetime warranty, so Jennifer has peace of mind that she chose the right solution to protect her basement for the long-term.

Ken I. in Rochester, MN was tired of having an uneven driveway and when he visited our booth at a local home show to learn more about our concrete repair, he decided to have one of our Design Specialists out to give him a FREE estimate. Our Design Specialist, Rick Weber, inspected his concrete and developed a specialized concrete repair plan for his driveway. Ken was pleased to learn the our PolyLevel concrete repair solution is a durable, faster and more affordable option that traditional concrete repair, so he scheduled the project.

Our PolyLevel experts, Jared Wroblewskiand Trevor Ellingson, drilled penny-sized holes into the concrete and injected the PolyLevel foam through the holes until the concrete was level. Then, they filled those holes back up with concrete. Lastly, they sealed the cracks in the driveway with our NexusPro sealant, which gives the driveway a nice, finished look. The process took about half a day and Ken was happy with how non-invasive it was. Ken can now enjoy a beautiful and level driveway for years to come!

Jeff S. in Rochester, MN was tired of having a sunken driveway that was causing a trip hazard. The driveway had sunk a couple of inches below the concrete garage floor. He saw one of our vehicles and was glad to see that we offer concrete repair, so he contacted us to receive a FREE estimate! Our Design Specialist, Rick Weber, went to his home to inspect his concrete problem and develop a solution. Jeff was pleased to learn the our PolyLevel concrete repair solution is a durable, faster and more affordable option that traditional concrete repair, so he scheduled the project.

Our PolyLevel experts, Brandon Wiskow and Troy Johnson, drilled very small holes into the concrete and injected the PolyLevel foam through the holes until the concrete was raised and level with the garage floor. Lastly, they sealed the cracks in the driveway with our NexusPro sealant, which gives the driveway a nice, finished look. The process took about half a day and Jeff was happy with how non-invasive it was. Jeff can now enjoy a beautiful and level driveway for years to come!

Justin G. in Waverly, IA had a cracked and bowing wall in his basement. He was hoping to put his home on the market soon but had learned that foundation problems can decrease the value of a home by 10-20%, so he contacted American Waterworks to receive a FREE estimate. One of our Design Specialists, Mac Cole, went onsite to inspect his foundation and design a solution. Mac assured him that we could permanently stabilize his foundation by installing wall anchors. Justin was pleased with the proposal, so he decided to move forward with the installation.

Our production team started the process by digging 4 holes outside of the home to line up with where the anchors would be installed. Then, they drilled 4 small holes through the concrete block wall in the basement and they inserted long metal rods. They installed anchor plates on each end of the rods and tightened them to secure the wall. By installing the wall anchors, Justin has permanently stabilized his wall and ensured that his home would not lose value due to a foundation problem. Our wall anchors are backed by a lifetime warranty, so he is confident he chose the right solution to repair the wall.

Frank H. in Madelia, MN had two walls in his basement that were cracked and bowing. He was worried about the stability of his foundation, so he contacted American Waterworks to learn more about his options to repair his foundation. One of our Design Specialists went to his home to inspect his foundation and provide him with a free estimate. Frank was pleased to learn that we could permanently repair his foundation by installation wall anchors, and that repairing his foundation is far more cost-effective than replacing it.

We installed the wall anchors along the two damaged walls by drilling long, metal rods through the wall into the soil. Then, we secured the rod on each end with anchor plates. The walls became permanently secure once the anchors were tightened. The installation only took two days, and now Frank no longer is worried about the stability of his home because our anchors have secured his walls.

Mark K. in Dover, MN had a sunken driveway that he had tripped on numerous times. He started looking for repair options and he came across American Waterworks’ website. He was interested in learning more about our PolyLevel concrete repair option, so he contacted us for a FREE estimate.

We sent one of our Design Specialists, Brian Ramirez to his home to inspect his concrete and provide him with a personalized solution. Mark was happy to learn that PolyLevel is faster, less invasive, and more durable than traditional mudjacking, so he scheduled to have his concrete lifted.

Our concrete repair experts drilled small holes into the concrete and injected the polymer foam until the concrete slabs were raised and even with the garage floor. Then, they filled back the small holes with concrete and sealed the cracks in the concrete with our NexusPro joint sealant.

The process only took a couple of hours to complete. This eliminated Mark’s trip hazard and now he can enjoy a beautiful concrete driveway for years to come!

Robert S. of Pillager, MN was interested in getting his cabin crawl space encapsulated before closing it up for the season. He went online and did some research on crawl space waterproofing companies that service his area and found our website. After scanning through our website, Robert called our office line and signed up for a FREE Estimate with our Design Specialist, Shane. Shane drove to his cabin, inspected Robert's crawl space, and drew up a solution that worked for him, his needs, and his budget. Robert was comfortable in Shane's proposal of our Drainage Matting, TerraBlock, and CleanSpace Encapsulation Vapor Barrier, so he signed the contract and got a date set for the project install. 

Our Foreman, Garrett, and his production team started the project by introducing themselves to Robert and ensuring that all of his questions were answered. After a thorough introduction, our team got to work and went down to the crawl space. They started the work by clearing out everything that was in the way and installing our Drainage Matting on the crawl space ground. Our Drainage Matting is designed to give the water a channel to the sump pump system and is the first step to keeping a crawl space dry. Next, our team installed our TerraBlock over the Drainage Matting. This special insulation is made to keep moisture from making its way up through dirt, stone, or crawl space flloors. Lastly, our team installed our CleanSpace Encapsulation Vapor Barrier around the entire crawl space which transforms the crawl space into a clean, dry, and energy-efficient part of the home. Robert was happy with the work that was done and could not believe the transformation from start to finish! 

Are you in need of crawl space repair? Call us today or click HERE to request your free estimate! 

Marilyn and Dale from Lakeville, Mn noticed the concrete slabs that are at the entrance of their garage were uneven and started to create a potential tripping hazard. Marilyn and Dale were afraid that if left unchecked the issue may worsen over time. They then contacted the Appointment Center here at American Waterworks to claim their FREE estimate, which entitles them to a free home inspection by our Design Specialist. Once the appointment was set, Kyle Peters, our Design Specialist then attended their home and proceeded to conduct a thorough home inspection to obtain a proper diagnosis of the issue and provide a solution that is best suited for the home. After the inspection was complete, Kyle then proposed to Marilyn and Dale that the best solution is to invest in our PolyLevel and NexusPro Solution. They agreed and proceeded to schedule a date of installation. 

Our Foreman, Ben Koehler, and his crew then proceeded with the project strategically drilling holes in the problem slabs and injecting the PolyLevel solution. The PolyLevel solution is a polyurethane foam that is injected underneath the concrete slabs filling the voids that were left by soil erosion and stabilizing the concrete slab. Once set and done the crew proceeds to apply the NexusPro Solution to the cracks and joints of the concrete slabs. The NexusPro Solution is a silicone-based solution that seals the joints and cracks and protects the PolyLevel for water and water vapor. The NexusPro Solution is also a tough solution that has a protectant against UV light to prevent the seal from drying and cracking.  

Marilyn and Dale were happy with the finished project and pleased to have a nice leveled driveway!

If you are experiencing a similar issue, contact the Appointment Center here at American Waterworks and claim your FREE estimate!!

A homeowner in Byron, MN, found that the walls in their basement were soaked after a rainstorm. Unnerved by this discovery, the homeowner wanted to have an expert inspect their home immediately. After doing some research into a variety of companies, the homeowner decided to work with us, American Waterworks. The homeowner called our Appointment Center and signed up for their FREE estimate. After the estimate was finalized, the home awaited the arrival of Darin, one of our Design Specialists. Darin arrived at the home and started the detailed analysis of the basement. Following his detailed analysis, Darin confirmed that the basement was leaking water. To stop the water from continuing, Darin recommended installing the WaterGuard to keep their basement dry. After comparing all their options, the homeowner decided to go with Darin's recommendations. Once they were approved, the plans were sent to Kiko and his crew. Kiko and his crew made their way out to the home to begin the installation. They began by unloading and prepping the basement for production as soon as they arrived. When the basement was ready, the crew started the WaterGuard installation.  The WaterGuard is a below-floor drain that rests in a bed of drainage stone on top of the foundation footing. The crew installs the WaterGuard by digging channels around the perimeter of the basement floor. Once the channels are dug, the crew can go ahead and place the drainage stone in the channels. The WaterGuard is then placed on top of the stone and covered with cement. Additionally, the crew dug a feedline from across the basement to ensure it ties to the current sump system. The crew finished the project and cleaned up their materials. The homeowner was in awe of the quick and excellent work completed by the crew. If you are experiencing a similar issue, sign up for your FREE estimate today! 

A homeowner in Rochester, MN had dealt with minor cracks and an uneven driveway for a few years. During the winter months when snow had covered the surface, she would have to shovel, and it would get caught on the extreme cracks, making the process difficult and inefficient. Now that it was summer, she was worried about the worsened cracked areas being a tripping hazard for her and others who visited the home. She decided to look into concrete repairing companies that had helped out others in the Rochester area and found the American Waterworks website. She scheduled one of our FREE no-obligation estimates and awaited the arrival of one of our Design Specialists, Mike Dexter. When Mike made a visit to the site, he talked over the homeowner's concerns and informed her of two of our products that could help repair the driveway. She agreed to the plans and was happy to have an answer to her concrete problems. We sent over Foreman Ryan Trogstad and his crew to install the products and get the driveway back to perfect condition. They first started the process by drilling small holes throughout the driveway and inserted ports to connect to the space below the slabs. Next, they filled the PolyLevel, a high-density polyurethane foam, through the ports to fill the space and lift the slabs back up. Next, the holes, cracks, and joints in between slabs were filled and sealed with NexusPro. This is a flexible and durable sealant for damaged concrete. Finally, they sprinkled native sand on top of the sealant to make a pleasing look to the driveway and finish the job. The homeowner was so happy with the work we did and that she had a smooth driveway again.

If you think your driveway is in similar need of our concrete repair services, don't hesitate to contact us for a FREE estimate at American Waterworks!

In Rochester, MN a homeowner was unhappy with the look of his front sidewalk, as the concrete slabs had spread out and increased the joint spaces in between them. Wanting to make a change earlier in the summer rather than later, he began his search for a concrete repair company. The American Waterworks page showed up during his search and he was slightly familiar with the name from living in Rochester. Finding out we offered FREE estimates, he signed up for one and looked forward to speaking more with an expert. When Design Specialist Mike Dexter arrived at the home, he carried out a detailed inspection and talked things over with the homeowner. Mike determined that the best solution for the homeowner's concerns was to lift, level, and seal the sidewalk areas. The homeowner was eager to move forward with the process and agreed to the installation plans. When the day came for the installations, Foreman Reese Rinken and his crew arrived at the site and began the project by drilling small holes through the concrete. Next, they inserted ports through the holes to reach the empty space below and injected the PolyLevel to fill in the void and immediately raise the sinking concrete slabs. Next, they filled the voids along with the empty joints in between the slabs with the NexusPro sealant, which resists UV rays, meaning it won't ever crack, bubble, or dry out. To finish the project, the crew placed a layer of native sand on top of the sealant for a pleasing final look to the sidewalk. The homeowner was thrilled with the results and thankful for our American Waterworks team members that made the results possible.

If you think you're also in need of concrete repair services, you know who to call! Schedule your FREE estimate with American Waterworks to get started.

A homeowner in Rochester, MN was interested in making some changes to his driveway because he noticed some of the slabs had sunk and separated away from the garage floor. He recognized that these problems were minor, but figured it was better to fix them now rather than have them get worse if left alone. Going online to find a solution, he searched "how to fix sinking driveway" and looked through the results page for a company that could carry out the repairs. Our website stood out to him because of the American Waterworks reviews from past customers that we had worked with. The homeowner decided to sign up for a FREE estimate with us to learn more about how we could help his specific situation. Our Design Specialist, Nate Bernard, went to the home to inspect the concrete apron and give his recommendations. Nate developed a detailed plan for installations to eliminate the homeowner's concerns. Later, one of our Foremen, Troy Johnson, and his crew went to the site to complete the project. The crew started by strategically drilling small holes throughout the slabs. Then, they inserted ports into those small holes and injected the PolyLevel foam beneath the concrete to fill the voids and raise the slabs. Once the PolyLevel injections were finished, the crew shifted their focus to filling the cracks and replacing the joints. The crew used our NexusPro sealant, a silicone-based sealant for joints and cracks formulated to provide long-lasting flexibility and withstand harsh weather conditions. Finally, the cracks were detailed with a thin layer of native sand to give the concrete a uniform, finished appearance. Once the installations were complete, the crew cleaned up their site and left the home. The homeowner was thankful that the repairs went well and enjoyed the results.

American Waterworks is ready to help another customer with their concrete problems! Click HERE to receive your free estimate with us today.

A homeowner in Rochester, MN was outside enjoying the warm weather on her front porch and when she walked down the concrete steps to the walkway, she noticed how far down the step she had taken was. Upon closer look she found a large gap between the base of the stoop and the walkway and knew it wasn't normal. She went online in search of a solution to eliminate the gap to ensure no one tripped while going up or down the steps in the future. She looked up "concrete lifting Rochester, MN" and shuffled through the results. The American Waterworks website stood out to her because our location was in Rochester and near her home, so she signed up for a FREE no-obligation estimate. We sent one of our Design Specialists, Nate Bernard, to check out the walkway and develop a plan to restore the space. Nate recommended installing two of our quality products to lift and seal the walkway with the stoop again. The homeowner agreed and met with our Foreman, Patrick Burnes, and his crew later at the home. They started the installations by drilling small holes throughout the walkway area and then inserted ports through them to reach the empty space under the concrete surface. Next, they filled the space with the PolyLevel which immediately raised the sinking slabs back up to eliminate the gap. To finish off the project, the crew used the NexusPro sealant to the joints and cracked areas which provides flexibility and long-lasting durability. They sprinkled a thin layer of native sand on top of the sealant for a smooth and appealing look to the concrete walkway. The crew cleaned, packed up their materials, and left the site, leaving behind a leveled walkway to the steps and a happy homeowner.

If your concrete is sinking, now you know what needs to be done! Schedule your FREE estimate with us today and get it leveled up again.

A homeowner in Rochester, MN was concerned about the concrete stairs leading up to the front door after he noticed how much the bottom step had sunk when he tripped while walking up it. He found a temporary concrete step to place in the large gap while he began his search for a more permanent fix with the help of a concrete replacement company. Looking up "concrete repair MN," the homeowner came across the American Waterworks company website and he realized the job could be completed with our PolyLevel injection rather than fully replacing the concrete. Relieved to hear this, he contacted our appointment center and scheduled a FREE estimate with us. We sent over one of our Design Specialists, Mitch Strain, to take a closer look at the walkway and make his recommendations. Mitch confirmed the homeowner's idea that lifting and leveling the concrete with PolyLevel was the best way to move forward. Once the plans were set and a date for the project was scheduled, they were handed over to our Foreman, Sam Klennert, and his crew. Later they arrived at the site, and they began by drilling small holes throughout the concrete step and inserted ports through them to reach the empty space below the surface. Then, the PolyLevel was injected in the ports to fill the empty space until the step reached its original height. The crew used NexusPro sealant to fill in the holes as well as the joints to eliminate any spaces or gaps in the stairs. Finally, a layer of native sand was spread on top of the sealant for a clean look to conclude the project. The homeowner was happy to be rid of the temporary step and have a hazard-free set of stairs again.

If you're interested in getting your concrete repaired, now's the perfect time! Click HERE to get started with a free no-obligation estimate with us.

A homeowner in Rochester, MN was interested in making some changes to his front walkway and stoop. Over the years he had realized the concrete had sunk, but he never thought to do anything about it until now. He didn't want to put off the project for another year, so he went online in search of a solution. He looked up "concrete repair MN" to see what company names were near him that could help with the repairs and found the American Waterworks website. Our name stood out to him because of our positive reviews from customers and FREE no-obligation estimates. He signed up for his own estimate and later was greeted at the home by our Design Specialist, Mitch Strain. Mitch inspected the concrete that the homeowner was concerned with and developed a detailed plan for the repairs. The homeowner trusted Mitch's knowledge on the situation, so he agreed to the proposed installation. On the day of the project, our Foreman, Dylon VanCanneyt, and his crew went to the site and began the process by drilling small holes throughout the concrete slabs and stoop. Next, they inserted ports through the holes to reach below the surface of the concrete and filled it in with PolyLevel solution. PolyLevel is an expanding polyurethane foam that is injected beneath the concrete to fill the gaps caused by soil erosion and raise and stabilize the concrete surface. To finish the project, the crew filled in the holes with some sealant for a smooth finish to the walkway and stoop that the homeowner was happy with. 

Don't wait to get your concrete repaired! Get the process started today by signing up for your FREE estimate.

Sinking concrete can be more than a tripping hazard and can lower the price of the sale of a home. A homeowner in Rochester, MN, was growing frustrated with sinking slabs in the front of his home and decided it was time to take action to correct the issue. He decided to do his research about what could have caused the issue and companies in the area that could help him fix the issue. Once he found our website, he was delighted to find that we offer FREE, no-obligation estimates and decided to book an appointment. A few weeks later, we sent our Design Specialist, Aidan, out to the home to assess the concrete and see what could be done. 

Once Aidan's inspection had been completed, he informed the homeowner that, unfortunately, sinking concrete is an all too common problem. He went on to say that concrete can sink for various reasons such as excess rain, excess heat, or poor compaction when the slab was poured. He reassured the homeowner that we could fix the issue by using our PolyLevel lifting and leveling solution to raise the slabs, eliminating gaps and restoring the curb appeal of their home. He informed them that our PolyLevel is a polyurethane foam that expands when it's inserted below sinking slabs. The homeowner agreed with the proposal of the work and the project was scheduled to begin a few weeks later. 

On the day of the installation, our Foreman, Jordan, arrived at the property and got right to work. First, Jordan verified the sunken areas and strategically drilled holes into the problem slab. Next, he inserted the PolyLevel into the holes, closely monitoring the lifting process to ensure no under or over-correction was made. Finally, he sealed any cracks and the joints of the concrete with our NexusPro to ensure that no elements would find their way under the slab, compromising the work. Once the job was complete our customer was thrilled to know his concrete concerns were in the past! 

If this issue sounds familiar to you, click HERE to claim your FREE estimate! 

A homeowner in Rochester, MN, was growing more and more frustrated with his sinking driveway. Over the years, he had noticed that the slab was separating further and further away from his home. Not wanting the issue to worsen, he contacted us and we set him up with our FREE estimate. A few weeks later our Design Specialist, Gary, headed out to the property to see what could be done. 

After Gary concluded his inspection, he informed the homeowner that it's not uncommon to see concrete sinking over time. He explained that it could be due to excess rainfall, excess drought, or simply because the soil below the slab wasn't properly compacted when the slab was laid. Nonetheless, he assured our customer we could fix it. He recommended the use of our PolyLevel solution, saying that it is the most modern and effective way to correct sinking concrete. Our PolyLevel solution is a polyurethane foam that expands when its inserted under sinking slabs, slowly lifting it back to it's original position. The homeowner agreed and work began a few weeks late.r 

Our Foreman, Pat, and his team installed our PolyLevel with no issue. He began by verifying the information Gary had given him, and then got to work strategically drilling holes into the concrete slab. Then, he inserted the PolyLevel into the holes, closely monitoring the lifting process to ensure no over-correction was made. Finally, Pat and his team sealed all cracks and joints of the concrete with our NexusPro to ensure that no elements would find their way under the slab. Once the job was completed, the homeowners were thrilled to know that they no longer needed to be frustrated with sinking concrete! 

Does this problem sound familiar? Click HERE to claim your FREE estimate! 

A homeowner from Rochester, MN, got in touch with us when she began to notice her concrete walkway separating from the stoop that leads to her front door. Having taken a few tumbles on the uneven concrete herself, she wanted to have the situation corrected to prevent further spills. After doing some digging, she came across our website and decided to sign up for her FREE estimate, and a few weeks later our Sales Manager, Jesse, stopped out at the house to see what could be done. 

Jesse took his time evaluating the sinking slab, took measurements, and checked other areas of the concrete surrounding the house. When he completed his inspection, he informed the homeowner that sinkage in concrete is normal and could occur for various reasons. He went on to say that the fix is fairly simple, stating that our team would use our PolyLevel Lifting Solution to address the issue. Our PolyLevel is a polyurethane foam that expands when it is injected under sunken concrete slabs, pushing it upward and back to its original position. After the stoop has been lifted, our team will apply our NexusPro, a silicone-based sealant that gets applied to all cracks and joints on the concrete to ensure nothing gets below the slab, compromising the lift. The homeowner agreed and the work was scheduled. 

On the day of the installation, our Foreman, Troy, began the process by verifying the areas of concern with the homeowner. Next, he strategically drilled holes into the sunken slab. Then, he inserted the PolyLevel into the holes, closely monitoring the lifting process to ensure no over/under correction was made. He finished by lining all of the cracks and joints with our NexusPro. Now our customer is thrilled to know she no longer needs to worry about trip hazards! 

Does this issue sound familiar? Click HERE to claim your FREE estimate! 

A homeowner from Rochester, MN, got in contact with us when she began to notice that her front concrete steps and concrete patio were beginning to separate, creating a trip hazard. Not wanting the issue to worsen, she decided to research companies in the area that offer concrete repair services. After finding a few options online, she decided to give American Waterworks a call and claim her FREE estimate. A few weeks later, our Design Specialist, Nate, headed out to her home to see what could be done. Once he completed his inspection he informed the homeowner that while the problem may seem large, the fix could be fairly simple and non-invasive. Nate explained that American Waterworks utilizes the most modern and effective lifting solution, PolyLevel, a polyurethane foam that expands when it's injected underneath sinking concrete slabs, slowly lifting the slabs back into place. He went on to say that as an added layer of protection, our team then installs our NexusPro, a silicone-based sealant that gets applied to the joints and cracks in the concrete to prevent any unwanted elements from getting underneath the slab, potentially compromising the lift. The homeowner was delighted to know that the fix was simple and agreed with Nate's recommendations. 

A few weeks later, on the morning of the project, our Foreman, Jordan, and his team arrived at the home and got to work by verifying the measurements Nate had left behind. Then, he began drilling holes into the concrete slab. Next, he pumped the PolyLevel through the dime-sized holes, carefully monitoring the lifting process to ensure no over-correction was made. When the lift was finished, he went around the perimeter of the concrete and applied our NexusPro. When the project was finished, our customer was relieved to know she no longer had to worry about separating concrete! 

Does this issue sound familiar? Click HERE to claim your FREE estimate! 

A Byron, MN, homeowner was prepping his home to put on the market, but before he could do so, he needed to address some sinking and uneven concrete patches around his home. One of the most noticeable areas was a walkway leading to the backyard. Not wanting the price and hassle of ripping out the concrete and replacing it, the homeowner began to search for other methods of restoration. Once the homeowner found our website, he decided to sign up for our FREE estimate, and a few weeks later, our Design Specialist, Dustin A, headed out to the home. 

Once Dustin completed his walkthrough, he met with the homeowner to give his recommendations. Dustin explained to the homeowner that concrete can crack and sink for numerous reasons but that American Waterworks could bypass the mess of full replacement with the help of our PolyLevel method. PolyLevel is a dense, polyurethane foam that expands when injected beneath sinking slabs. This modern solution works to fill voids left by soil erosion and slowly lifts the concrete back into place. Dustin went on to say that after the lift is complete, our team would complete the installation with our NexusPro. A silicone-based sealant, NexusPro gets applied to all cracks and joints in the concrete and prevents unwanted moisture from getting below the slab. The homeowner agreed with the work proposed and scheduled the job to be completed a few weeks later. 

On the day of the project, our Foreman, Sam, and his team were able to lift, level, and seal the concrete with no issues. Now, our customer can put his home on the market knowing his cracked concrete has been dealt with! 

A homeowner from Rochester, MN, had been dealing with a sunken garage floor for some time. Now, the issue was worsening to the point of resulting in large cracks running the length of the garage. The homeowner no longer wished to with the issue, so he began to look for a contractor offering concrete lifting in Rochester, MN. When he found our website, he perused through other projects in the area and was impressed with the results. He signed up for his FREE estimate, and several weeks later, Will R, was heading to the home. 

Will inspect all of the concrete in front of the home. When he finished, he informed the homeowner that sunken concrete is quite common and can occur for a variety of reasons. Regardless of the reason, Will stated that we could save the sinking concrete with the help of our PolyLevel injection, a polyurethane foam that expands when it's injected beneath concrete slabs. It slowly fills voids left by soil erosion and lifts concrete back to its original location in the process. Will went on to say that, in comparison to other methods, PolyLevel is cheaper, less invasive, and less time-consuming. He then went on to say that he recommended safeguarding the lift with the help of our NexusPro. This silicone-based sealant gets applied to the cracks and joints in the newly lifted concrete and serves as a barrier against harsh weather conditions. The homeowner liked the sound of Will's plan and scheduled the installation for several weeks later. 

On the day of the project, our team arrived bright and early. Led by their Foreman, Dylon V, were able to lift and seal the garage floor without issues. Now, our customer can rest easy knowing his garage wouldn't be sinking any further!