Choice Foundation Repair & Basement Waterproofing in Renville County

Todd Z. in Olivia, MN was concerned about the stress that his bowing foundation walls in his basement were putting on his home. He knew how expensive replacing an entire foundation could cost, so he started researching foundation repair options. Todd visited the American Waterworks booth at a local home show and talked with our Design Specialist, Jeremy Radtke, about his situation. They set up a time for Jeremy to come out to his home, inspect his bowing walls, and give him a FREE estimate. Jeremy developed a personalized plan to stabilize Todd's walls. Todd appreciated how thorough Jeremy's plan and he was eager for the installation

Our production team carefully placed 25 wall anchors throughout Todd's basement. After they tightened the anchors the walls were straightened and stabilized. Our wall anchors have a lifetime guarantee, so Todd has peace of mind that he invested in permanently protecting his home.

A home in Renville, MN that was owned by a bank had major structural issues due to a cracked foundation wall. The bank wanted to put the home on the market, but they knew they would need to have it repaired before doing so. After researching foundation repair contractors, they decided that American Waterworks was the best fit for the project. We sent a Design Specialist to the home to meet with a representative from the bank. Our Specialist inspected the home and determined that we could permanently repair the foundation by installing wall anchors. The bank agreed with the proposal, so the project was scheduled.

Our production crew installed the anchors by drilling small holes through the damaged foundation wall in the basement. Then, they inserted long metal rods that went into the soil surrounding the home. They had dug small holes in the yard that lined up with the rods so that they could secure them with anchor plates. After the rods were secured from both ends, the crew tightened them as far as they could go. The wall became stable and started to straighten immediately after the installation. The bank was pleased with how smooth the process went, and the home was ready to sell.

Myron M. in Morton, MN had a cracked foundation wall and he had heard we repair foundations, so he stopped to speak with one of our Design Specialists at a local home show. We set up a time to give him a FREE onsite estimate, so we could inspect his basement and provide him with a solution. After evaluating his foundation, we recommended installing wall anchors to permanently stabilize his foundation wall. He was happy to learn that this is a more efficient and cost-effective method compared to replacing his foundation, so he scheduled the installation.

Our production team started the installation by drilling small holes through the block foundation and inserting long metal rods. Then, they secured the ends of the rods with anchor plates and tightened them as far as they could go. Our wall anchor system is designed with galvanized steel, allowing for long-term corrosion resistance. Each anchor system also includes a 25-year warranty against manufacturing defects, and each installation includes our own performance warranty. Myron is thrilled that he no longer has to be concerned about the structural integrity of his foundation. He is glad he chose American Waterworks to restore his peace of mind and the value of his home! 

Radon is a naturally occurring radioactive gas that we cannot see, smell, taste or touch, therefore it can easily go unnoticed. Erin from Bird Island, MN learned that radon is the second-leading cause of lung cancer in the United States, and she realized that she had not yet had her home tested! She contacted American Waterworks to have her home tested for radon and the results showed 4 pCi/l, which is the required action level for mitigation set by the EPA. After learning that her home had dangerous levels of radon, she set a date to have our mitigation system installed.

Our radon mitigation experts drilled a small hole through the concrete floor in the basement to create a suction point for the radon. They inserted PVC piping into the hole and ran the pipe up the wall and out of the house. They installed a fan halfway up the PCV pipe to ensure that the radon gas would be pushed up and away from the home. The installation was minimally invasive and only took half a day to complete. Erin is glad that she chose to make her home much healthier by installing our radon mitigation system.

Tom and Cindy of Hector, MN had a bowing foundation wall in their basement that needed to be looked at and inspected. They called American Waterworks hoping we could offer the right tools to fix the problem. One of our Design Specialists, Shane Nephew, went out to their house for a Free Estimate to examine the wall. He came up with a perfect solution so Tom and Cindy moved forward with the project. 

Our production team started the installation of our wall anchors system by digging five small holes outside of the home parallel to the bowing wall. They inserted long, metal rods through the foundation and into the soil, then tightened both ends of the rods with anchor plates to straighten the wall out. Our wall anchors are one of the best foundation repair products that we offer and they have a 25-year warranty. With the completion of their secured wall, Tom and Cindy were at ease and content with the work we did for them! 

Gladys C. of Fairfax, MN had water leaking in her basement and called American Waterworks to set up a Free Estimate. We sent out our Design Specialist, Jeremy Radtke, to inspect the problem and come up with a solution. Gladys was comfortable with the inspection and proposal, so she went ahead with the project.

Our Foreman, Arturo Mares, and his production crew began the installation by breaking out the concrete with a jackhammer around part of the basement perimeter to form a trench. In that trench, our team installed 10 feet of our WaterGuard System, which catches water seepage from basement walls and serves as an underground drainage system. Next, our team installed our SuperSump Plus M53, which is made to keep basements dry for a long period of time. From the sump pump discharge line, our crew installs our LawnScape Outlet outside of the home for water to escape the home. To complete the project, Arturo and his team filled the open gaps with rock and replaced the concrete. Gladys was very satisfied with the project, and was glad American Waterworks was able to save the life of her basement!

A homeowner in Buffalo Lake, MN, was exiting their driveway when they noticed a drop. After taking a look, the homeowners noticed a significant gap between their garage and driveway. While searching for a solution, they discovered American Waterworks services concrete repairs. After signing up for the FREE estimate, Design Specialist, Mike, went out to the property to take a look. Mike assessed the situation and recommended the driveway be lifted and the crack be filled in. He suggested the use of our PolyLevel lifting solution, which is a polyurethane foam that expands when injected and is used to lift the concrete back to its original state. Our Foreman, Dylon, and his crew went out and began the repairs. The crew began the installation by drilling holes strategically throughout the problem concrete slab. Next, they injected the PolyLevel foam into each hole and closely monitored the lifting process to ensure no overcorrection was made. Finally, the crew sealed the concrete joint that connects the driveway to the garage. Then, the crew moved on to fix the cracked concrete. The crew utilized NexusPro, a silicon-based sealant for joints and cracks that protects from damage caused by soil compaction and washout, to fill the cracks. The crew completed the repairs and the homeowners were happy with their home's new look. If you are experiencing a similar issue, don't hesitate and sign up for our FREE estimate today! 

A homeowner in Bird Island, MN, looked for professional guidance regarding the growing cracks in their foundation walls. Although they had many foundation repair options around them, the homeowners chose to work with us, American Waterworks. The homeowners contacted our Appointment Center and set up their FREE estimate. Soon after the appointment was set, we sent our Design Specialist, Ryan, to inspect the walls. Following his inspection, Ryan determined the basement showed signs of settlement and needed to be permanently stabilized. Ryan proposed to the homeowners that we can install Geo-Locks and CarbonArmor on their basement walls.  The homeowners agreed to Ryan's proposal and the plans were sent to the assigned crew. 

Our Foreman, Hugo, and his crew traveled to the home and began installing the stabilization products. First, the crew focused on installing nine Geo-Locks on the east wall and five on the south wall. Geo-Locks is our innovative wall anchor system that permanently stabilizes your foundation by anchoring your walls to untouched soil beyond your foundation. The crew starts by digging a section out of the homeowner's lawn and placing the exterior Geo-Lock. Then, a small, steel pole is directed underneath the ground to connect to the interior Geo-Lock. After the Geo-Lock is properly installed, the crew places the excavated lawn back to its original place. The crew then shifts its focus to the CarbonArmor installation. CarbonArmor uses epoxy and carbon fiber strips to strengthen and stabilize foundation walls that are cracked or bowed. First, the crew cleans the wall to ensure good adhesion. Then, the technician masks off each carbon fiber strip location and saturates the masonry with epoxy. Next, the CarbonArmor is attached to the wall and is permanently a part of the wall structure. The homeowerns were thankful that their foundation walls were properly stabilized. If you are experiencing a similar issue, sign up for your FREE estimate today! 

A homeowner in Fairfax, MN, was finishing up yard work when they realized their driveway and concrete were in desperate need of assistance. Wanting to avoid replacing the entire slab, the homeowner looked into concrete repair options. With these requirements, the search was filtered down. One of the first companies that jumped out at them was us, American Waterworks. Impressed with our services, the homeowner decided to call our Appointment Center and sign up for their FREE estimate. Soon after the estimate was made, we sent one of our Design Specialists, Kevin, to investigate. Kevin arrived at the home and introduced themselves to the homeowners, then they began the concrete evaluation. Once he was complete, Kevin determined the sinkage and cracks were caused by soil settlement. To avoid total replacement, Kevin suggested that the homeowner lift and level the sidewalk with our PolyLevel. Knowing this was their best option, the homeowner agreed with Kevin's suggestions and production began. Our Formen, Dylon and his crew traveled to the home to begin the PolyLevel and NexusPro installation. PolyLevel is a polyurethane foam injection solution that restores the appearance and safety of the concrete. The crew started by strategically drilling small holes throughout the slab. Then, the crew inserts ports into those small holes. Next, the polyurethane foam is injected beneath the concrete to fill voids and raise the slabs. Finally, the holes and control joints are sealed. Once the PolyLevel injection was finished, the crew shifted their focus to filling the cracks and replacing the joints. The crew utilized NexusPro Sealant, a silicone-based sealant for joints and cracks formulated to provide long-lasting flexibility and withstand harsh weather conditions. The crew begins by drilling, smoothing, and preparing the non-absorbent backer rod filler. Then, the NexusPro sealant is inserted in the prepared crack or control joint. Finally, the cracks are detailed with a thin layer of native sand, giving the concrete a uniform, finished appearance. Once everything was complete, Dylon and his crew cleaned up their materials and left. The homeowner was thankful that their sidewalk was properly repaired. If you are experiencing a similar issue, sign up for your FREE estimate today! 

A homeowner in Hector, MN, was organizing their basement when they noticed several, large cracks on many of their foundation walls. Knowing this was not a good sign, the homeowner decided to have a professional inspect their walls. The homeowner began their search and came across our website. After seeing we offer an impressive list of services, the homeowner decided to sign up for their FREE estimate. Quickly after the estimate was set, the homeowner prepared for the arrival of Kevin, one of our Design Specialists. Kevin performed a thorough examination of the basement, finding that it was showing early signs of wall failure. To stop the wall failure from progressing, Kevin recommended that the walls be permanently stabilized. After showing them many versions of a solution, the homeowner chose the one that was best for their situation. Once the version was selected, the homeowner prepared for the arrival of our Foreman, Matt, and his crew. After they arrived, they began by installing the GeoLocks, our innovative wall anchor system. To install the GeoLocks, the crew installs the GeoLocks by digging a section of the ground to place the first GeoLock anchor. Once the GeoLock is in place, another anchor is attached to the interior wall. Both GeoLocks are connected by a small, steel pole direct through the ground. Once the GeoLocks are secured, the soil is put back on top of the ground. Once the GeoLocks were installed, the crew shifted their focus to installing the PowerBraces on the wall. PowerBraces is a patented foundation wall repair system that is designed to stabilize failing basement walls and has the potential to straighten over time. To install the PowerBraces, the crew begins by cutting the wall braces. Next, the PowerBraces are secured into the floor joist hardware and fine-tuned into the correct position. Then, the PowerBraces are attached to the floor with a special, bolt-in-place bracket. After the PowerBraces were secured, the homeowner cleaned up the site and left the home. The homeowners were thankful to know their walls were secured and no longer at risk of wall failure. If you see growing cracks in your wall, sign up for your FREE estimate today!

A homeowner in Morton, MN, was nervous about the status of their basement after a heavy rainfall. After discovering water stains underneath the egress window in their basement. Knowing this was a larger issue at hand, the homeowner looked for expert assistance. After searching the area for the best basement restoration company, the homeowner came across our website. The homeowner was impressed with our impressive list of services, so they decided to sign up for their FREE estimate. Once the estimate details were finalized, the homeowner prepared for the arrival of Shane, one of our Design Specialists. Shane began the survey of the foundation and confirmed it required stabilization and waterproofing. Shane recommended that the issues be resolved now, to save a headache later on. Knowing this was their best option, the homeowner agreed and the production plans were sent to the assigned crew. After they were prepared, the crew arrived at the home to begin. First, the crew started by installing the TripleSafe sump pump, our most reliable sump pump system that provides three levels of protection for your basement. Once the TripleSafe was installed, the crew shifted their focus to attaching CleanSpace to the walls. CleanSpace is a plastic, waterproof vapor barrier that is ideal for unfinished basement walls. The crew mechanically attaches CleanSpace using plastic drilled-in fasteners. Next, the crew installed GeoLocks on the north and west foundation walls. GeoLocks is a wall anchoring system that is custom-designed to prevent walls from bowing and cracking. The GeoLocks is permanently stabilized to your foundation walls by anchoring your walls to hard-packed untouched soil beyond your foundation. To finish up the project, the crew attached an IceGuard to the outside discharge line. The IceGuard is a fitting that ejects water away from the foundation if the sump pump discharge line freezes or becomes clogged. The homeowner was pleased with the completed project. If you are experiencing a similar issue, sign up for your FREE estimate today! 

A homeowner in Olivia, MN, wanted to have their radon levels tested in their home.  From this point, the homeowner knew that a professional to step in and look further. The homeowner began looking for a company that would perform radon testing. One of the first companies to show up on their hunt was us, American Waterworks. After seeing our stellar reviews, the homeowner looked into all the services we offer. The homeowner was impressed by our service lineup and decided to sign up for their FREE estimate. Once the estimate details were finalized, the homeowner prepared for the arrival one of our Design Specialists. Upon their arrival, they introduced themselves to the homeowners and began the evaluation of the basement. The Design Specialist discovered that the radon levels in the home were alarmingly high. The Design Specialist alerted the homeowners of the issues he discovered in their home and how they could cause long-term damage. After warning the homeowner, the Design Specialist also provided them with a solution that would solve all their issues. The homeowners agreed and production began. Our Foreman, Dakota and his crew arrived at the home to install the Radon Mitigation System outside their home. The Radon Mitigation System will lower the concentration of radon gas in your interior air to the minimal levels recommended by the EPA and other health agencies. After the system was installed, the crew was able to clean up the site and leave the home. The homeowners were thankful for the wonderful job completed by the crew. If you are experiencing an issue, sign up for your FREE estimate today! 

A homeowner in Renville, MN, was looking for a solution to the water leakage issues in their basement. Not sure who they should contact, the homeowner looked for advice from a local Facebook group. They received an overwhelming response recommending, American Waterworks. After hearing all the positive reviews, the homeowner decided to sign up for their FREE estimate. Once the appointment was set, we sent Design Specialist, Dylan, to evaluate the possible damages. Following his evaluation, Dylan recommended the homeowners waterproof the basement with the WaterGuard system. Wanting to solve the issue, the homeowners agreed. After the plans were approved, the crew was sent out to start the waterproofing. To start, the crew installed the WaterGuard system around the perimeter of the basement. The WaterGuard system is our patented below-floor drain that rests in a drainage bed on top of the foundation footing. The WaterGuard is mainly used as a drain system due to its resistance to water clogs, easy access ports, and ability to collect leaking water. The crew dug channels around the perimeter of the basement and then placed the WaterGuard in those channels. Once in place, the WaterGuard is covered with rocks and cement. Next, the crew installed the SuperSump + Pump System. This sump pump is designed to keep basements dry and healthy for long periods, even during heavy water intrusion. A feedline was installed across the foundation floor. Additionally, the crew installed the IceGuard, an anti-freeze fitting that is installed outside the home and ejects water away from the foundation. After the crew completed the waterproofing, they cleaned the job site. The homeowner was given peace of mind knowing they have a state-of-the-art waterproof system. If you are experiencing water stains in your basement, sign up for your FREE estimate today!

A homeowner in Buffalo Lake, MN was eager to make some changes to his front yard space before the upcoming summer months. He especially was interested in finding a solution for his concrete walkway and driveway because they were sunken and created large gaps in between the joints. The homeowner knew that he wanted a timely solution because his son's grad party was coming up when their friends and family would be using the concrete spaces. He didn't know the next best step so he went online to see what else he could learn by searching "concrete lifting services near me." One of the results that popped up was our website and he was impressed with the many positive American Waterworks reviews from past jobs done. He signed up for a FREE no-obligation estimate with us and we sent over Design Specialist Kevin Beseman to the home. Kevin assured the homeowner that we had a solution for him and that our quality PolyLevel foam would be able to lift and level the concrete quickly and be ready for the grad party guests. The homeowner was happy to hear this information and agreed to the installation plans. On the project day, our Foreman and his crew showed up at the site and began the process by drilling small holes throughout the concrete. Then, they inserted ports through the holes until they reached below the surface to the empty space. Our PolyLevel foam was injected in the ports to carefully lift the slabs back up to their original height. The crew filled in the holes and in between the slabs with NexusPro concrete joint sealant. Some native sand was spread on top of the sealant for a smooth final look. The homeowner was happy with the job done and relieved to have the space ready for the grad party and all other outdoor summer activities.

Looking to make some changes to your concrete areas as well? You know who to contact! We've got you covered and want to set you up with a FREE estimate to get started!