Vernon County, WI's Skilled Basement & Crawl Space Waterproofing

Darlene D. in Stoddard, WI had learned about the dangers of being exposed to high levels of radon and decided that it was time she had her home tested. She contacted American Waterworks to do a free radon test and mitigation consultation. The results showed that she did in fact have high levels of radon gas that could be harmful to her health. She worked with our Design Specialist, Mac Cole, on how to mitigate the high levels of radon. 

Our Foreman, Dakota Merchlewitz, drilled a hole through the corner of the basement floor to create a suction point. He then installed a PVC pipe that connects to a fan which ensures proper ventilation away from the home. The process of installing the radon mitigation system only took a couple of hours. Darlene can now take comfort in the fact that her home is well protected against harmful levels of radon.

Tim D. learned about the negative effects that radon gas can have on people's health and that it is commonly found in homes. Radon is the #1 cause of lung cancer for non-smokers and kills over 21,000 people each year. He realized that their home had never been tested so he immediately started looking for a contractor to test his home. After doing some research, he came across American Waterworks and saw that radon testing and mitigation is one of our specialties. He contacted us and shortly after, we sent a Design Specialist to his home to start the test.

48 hours later, that Design Specialist returned to read the results of the test. Their reading was above 4 pCi/l, which is the level at which the EPA recommends the homeowner to take action. Once Tim discovered that he and family have been exposed to high levels of radon, he wanted to get the radon mitigation system installed as soon as possible to protect their health.

Our radon mitigation specialists drilled a hole through the concrete in the basement to create a suction point for the gas. Then, a PVC pipe is inserted which goes up through the house and exits the home through the roof. A fan is installed at the top of the PVC pipe to ensure that the radon gas is being pushed away from the home. The installation took one day to complete, and now Tim can rest easy knowing that he took the right measures to protect his family and himself.

Rod H. in Coon Valley, WI was experiencing water leaking into his basement because his sump pump had failed. He started researching waterproofing contractors in the area and he found American Waterworks. After learning that we’ve been waterproofing homes for almost 30 years, he felt confident that we could solve his wet basement problem. He called us to receive a free estimate, so we sent a Design Specialist to his home to inspect the basement and design the right solution. After meeting with Rod, our Design Specialist determined that the right course of action was to have our WaterGuard drainage system and a new sump pump installed. Rod was impressed with the quality of our products and the thorough plan to waterproof his basement, so he scheduled the installation.

Our production team removed a thin line of concrete around the perimeter of the basement floor and a circle in the corner of the room for the sump pump. They laid the WaterGuard in the trench they created, installed the SuperSump sump pump, and then replaced the concrete. Lastly, they ran a pipe from the sump pump, out to the yard. This is called a discharge line and it is where the water exits the home. He has been able to enjoy a dry, healthier basement since he had our waterproofing system installed. He is glad he chose to protect his basement for the long-term!

A homeowner in Westby, WI, wanted to have a professional visit their home and inspect the status of their foundation. Not knowing where to begin, the homeowner simply researched "foundation companies near me". The first result was us; American Waterworks and the homeowner was intrigued by our five-star rating. After looking further into our services, the homeowner decided that they were going to sign up for their FREE estimate. Once the details were finalized, we sent Dustin, one of our Design Specialists, to complete the estimate. Dustin arrived at the home and began his inspection of the foundation and crawl space. Once he completed the inspection, Dustin determined that the crawl space was a major concern. Dustin recommended that the crawl space be encapsulated, and the homeowners agreed. Once they received approval, our Forman, Raul and his crew made their way to the home. Once they arrived, the crew began by clearing out the debris in the crawl space. After the space was cleared, the crew could start the SmartJack installation. SmartJacks provides solid support for sagging and undersized beams, restoring stability and straightness to sagging floor joists in crawl spaces. SmartJacks provides a permanent solution to your foundation floor issues. Once the SmartJacks were secured, the crew shifted their focus to laying down the Drainage Matting on the crawl space floor. The Drainage Matting keeps your crawl space protected, and water directed into your drainage system. Next, the crew installed CleanSpace on the crawl space floors and walls. CleanSpace is a 100% waterproof plastic vapor barrier that is ideal for unfinished basement walls. Soon after the CleanSpace was installed, the crew cleaned up the job site and left the home. The homeowners were grateful for the excellent job completed by the crew. If you are experiencing a similar issue, sign up for your FREE estimate today! 

A homeowner in Stoddard, WI, saw it was time to schedule their annual maintenance appointment with us. Soon after this realization, the homeowner called our Appointment Center and signed up for their appointment. Once the details were finalized, the homeowner prepared for the arrival of one of our Service Technicians, Kyle. Upon arrival, Kyle introduced himself to the homeowners and began the maintenance check. During his inspection, Kyle discovered that one of the foundation walls was cracking. Kyle warned the homeowners about his discovery and suggested that they permanently stabilize the wall. Trusting our judgment, the homeowners agreed, and the production preparations began. Our Foreman, Raul, and his crew traveled to the home to begin the stabilization process. The crew installed the seven CarbonArmor strips on the north foundation wall. CarbonArmor strips utilize epoxy and carbon fiber strips to strengthen and stabilize foundation walls that are cracked or bowed. To install the CarbonArmor strips, the crew begins by cleaning the wall to ensure good adhesion. Then, the technician masks off each carbon fiber strip location and saturates the masonry with epoxy. The CarbonArmor reinforcement becomes part of the wall structure. Additionally, the CarbonArmor can be painted over and hidden from eyesight. Once the CarbonArmor strips were in place, the crew cleaned up their job site and left the home. The homeowners were grateful for another job well done by our crews. If you are experiencing a similar issue, sign up for your FREE estimate today! 

A homeowner in Viroqua, WI, knew they desperately needed a professional to inspect their foundation. While thinking of companies, the homeowner remembered seeing one of our vehicles in the area. The homeowner went to our website and saw that we offer a large variety of services. Impressed by our services, the homeowner was convinced enough to sign up for their FREE estimate. Once the estimate appointment was set, Chuck, one of our Design Specialists, traveled to the home to begin the estimation. Once Chuck completed the estimate, he found foundation was rapidly falling and needed to be stabilized. Chuck suggested stabilizing the struggling walls with GeoLock anchors, our innovative wall system, and PowerBraces, our wall repair system. After weighing all their options, the homeowner agreed with Chuck's plan. The plans were sent to our Foreman, Luis, and his crew, so they could start production preparations for this large job. When they arrived, the crew installed 20 GeoLock anchors on the north and south foundation walls. The crew installs the GeoLocks by digging a section of the ground to place the first GeoLock anchor. Once the GeoLock is in place, another anchor is attached to the interior wall. Both GeoLocks are connected by a small, steel pole direct through the ground. Then, the GeoLocks are secured, and the soil is put back on top of the ground. Once the GeoLocks were in place, the crew installed four PowerBraces on the east foundation wall. PowerBraces is a foundation wall repair system, designed to stabilize failing basement walls and provide the potential to straighten them over time. First, the crew begins by cutting the wall braces. Next, the PowerBraces are secured into the floor joist hardware and fine-tuned into the correct position. Then, the PowerBraces are attached to the floor with a special, bolt-in-place bracket. Once all the products were installed, the homeowner asked that the tightening kit be included for the PowerBraces and GeoLocks. This will allow the homeowner to straighten their walls over time. When the job was complete, the crew put the basement back together and left the home. The homeowners were beyond grateful for the excellent job completed by the crew.  If you are experiencing a similar issue, sign up for your FREE estimate today! 

A homeowner in Viroqua, WI, noticed their basement was quite humid and damp. Knowing they needed professional assistance, the homeowner looked for the best options near them. After some investigating, the homeowner came across our website. Impressed by our reviews and ratings, the homeowner decided to sign up for their FREE estimate. Once the estimate was set, the homeowner awaited the arrival of Dustin, one of our Design Specialists. Dustin arrived at the home and began his detailed analysis of the basement. When he completed his analysis, Dustin confirmed the homeowner's worries. However, he was also able to provide them with a solution. Dustin recommended installing CleanSpace and the Aprilaire in the basement. Knowing this was their best option, the homeowner agreed. The plans were sent to the office for approval and then sent to our Foreman, Francisco, and his crew. Once they arrived, Francisco and his crew started the project by installing CleanSpace on all the basement walls. The CleanSpace Wall system is a quick and economical way to encapsulate basement walls. It stops the water vapor from permeating the walls and moves away from any leaks to the drain. The crew mechanically attaches the CleanSpace by drilling them in with plastic fasteners. Once all the walls were covered with CleanSpace, the crew shifted their focus to installing the Aprilaire. The Aprilaire dehumidifier is a high-capacity solution that helps you achieve complete comfort through humidity control. After all the products were installed, the crew cleaned up their materials and left the home. The homeowner was grateful for the excellent work completed by the crew. If you are suffering from a similar issue, sign up for your FREE estimate today! 

A homeowner in Chaseburg, WI, knew it was time to have their sunken concrete repaired. The homeowner wanted to avoid total concrete replacement or mud jacking, so they looked for alternative methods. After some looking, the homeowner discovered a method called "PolyLevel Injection". The homeowner saw this option check all their boxes, so they looked into companies that offered PolyLevel injection near them. One of the first companies to show up was us, American Waterworks. After seeing our impressive before and after concrete photos, the homeowner signed up for their FREE estimate. Soon after the estimate was made, the homeowner awaited the arrival of Will, one of our Design Specialists. Will arrived at the home and began evaluating the status of the sidewalk. After his detailed evaluation, Will confirmed that PolyLevel could be installed underneath the sinking sidewalk. Eager to get the project started, the homeowner agreed. After the plans were approved by the office, they were directed to our Foreman, Troy, and his crew. Once Troy and his crew arrived, they started by installing the PolyLevel. PolyLevel is a polyurethane foam injection solution that restores the appearance and safety of concrete. The crew started by strategically drilling small holes throughout the slab. Then, the crew inserts ports into these small holes. Next, the polyurethane foam is injected beneath the concrete to fill voids and raise the slabs. Finally, the holes and control joints are sealed. Once the PolyLevel installation was complete, the crew cleaned up their materials and left the home. The homeowner was pleased with the impressive results. If you are suffering from a similar issue, sign up for your FREE estimate today!

In Coon Valley, WI a homeowner was annoyed with the large bump that had formed in between his driveway apron and the garage floor. Every time he drove in and out his car ran over it and it also created a tripping hazard for him and his family. Not wanting the problem to get worse or stay the same, he knew it was time to research and find a solution. The homeowner looked up "concrete repair MN" and a list of services showed up, but only one stood out to him: American Waterworks. Our FREE no-obligation estimates were interesting to him because he liked the idea of learning more about the products and our process before agreeing to any plans. He signed up for his own estimate and was later greeted by one of our Design Specialists, Ross Johnson. Ross inspected the concrete and then created a detailed plan specifically for the driveway that involved installing two of our quality products: PolyLevel and NexusPro. The homeowner agreed to the plans and once they were approved, we sent over our Foreman, Domanik Adams, and his crew to the site. They began the project by drilling small pencil-sized holes in the driveway and placing ports through them to reach below the concrete's surface. The PolyLevel foam was then injected in the ports until it filled the space below and the slabs were lifted back up to be level with the driveway. Next, the holes were all filled with the NexusPro sealant as well as the joints in between each slab. Some native sand was placed on top of the sealant for a smooth final look and the homeowner was very happy to have a bump-free driveway again.

Thinking of getting your own driveway lifted and leveled? Give us a call to get the process started with a FREE estimate!

Following a heavy rainstorm, a homeowner in Genoa, WI, decided to check on their crawl space. The homeowner discovered that the crawl space was damp and musty. Concerned this could lead to larger issues down the road, the homeowner began looking for an expert to fix their crawl space. After looking through several companies, the homeowner came across our website. Impressed by our high reviews and ratings, the homeowner decided to call our Appointment Center and sign up for their FREE estimate. Once their FREE estimate was set, the homeowner awaited the arrival of one of our Design Specialists, Trevor. After Trevor arrived at the home, he introduced himself and began inspecting the crawl space. Trevor confirmed that the crawl space was damp and needed to be encapsulated. Once he wrapped up his investigation, Trevor alerted the homeowner of his findings and was able to recommend a solution. The homeowner wanted to have the solution resolved, so they agreed with Trevor's recommendations. After the homeowner approved the plans, they were sent to the office for finalization. Our Foreman, Diego, and his crew received the plans, so they packed up their materials and traveled to the home. Once they arrived, Diego and his crew began installing Drainage Matting on the crawl space floor. Drainage Matting is a durable matting that creates a drainage space and thermal break between CleanSpace and the ground. Next, the crew installed CleanSpace on the crawl space walls and floors. CleanSpace is a 100% waterproof plastic vapor barrier that prevents humidity and mold growth. The crew installs CleanSpace by mechanically attaching them to the basement walls with plastic drilled-in fasteners. Next, the crew installed Foamax on the basement walls. Foamax is an advanced polyisocyanurate foam insulation panel that is designed with while foil finish on the front and a foil vapor that helps control crawl space humidity. After Foamax was installed, the crew cleaned up their materials and left the home. The homeowner was thankful to know their crawl space was properly encapsulated and energy efficient. If you are experiencing a similar issue, sign up for your FREE estimate.