Expert Basement Waterproofing Company Serving Wabasha County

Ken W. in Lake City, MN had noticed that the crack on his garage wall had gotten far worse over time and he noticed the concrete of his garage started to sink and shift. He was concerned that there was a larger underlying problem, so he got in touch with American Waterworks to have a foundation repair expert inspect it. Our Design Specialist, Mac Cole discovered that the foundation on the side of his garage wall had started settling which was also causing the cement in his garage to become uneven. Mac developed a thorough plan invloving our push piers and PolyLevel injection. 

Ken wanted to move forward with Mac's plan, so our crew started installing the piers. Three piers were put under the footings of where the foundation was settling. The piers allow the weight of the home to be shifted to a more competent soil. Then we injected our PolyLevel foam into numerous sections of the garage's concrete slabs to raise and level them. The total project only took two days to complete. Ken was glad he made it a priority to protect his home and stabilize his foundation. 

Eleanor M. in Plainview, MN was experiencing water seeping into her basement through her basement window and water had started pooling on the floor. It had severely damaged her window and the surrounding areas. She was concerned about her air quality and the health problems it could cause.

She contacted American Waterworks to have a professional waterproofing company look at it. We sent our Design Specialist, Dustin Loftus, to her home to give her a FREE onsite estimate and create a solution to her problem. 

Eleanor felt that our solution was the most appropriate for her basement, so we sent our crew to install out waterproofing system. We installed an EverLast basement window, WaterGuard along the perimeter of the wall with the window and a SuperSump sump pump. The combination of these waterproofing products ensure that her basement will remain a dry, clean and livable, space.

Faith Lutheran Church of Wabasha in Minnesota had a sunken and uneven sidewalk. They were concerned that people would trip and fall because of it, so they started to look into concrete repair contractors. They saw a commercial for American Waterworks and they were interested in learning more about our concrete repair option. They contacted us for a FREE estimate, so we sent one of our Design Specialists, Rick Weber, to the Church to provide them with a solution. They were happy to learn that our PolyLevel concrete repair solution is durable, faster and more affordable than traditional concrete repair. They decided this was the best option and felt that our company was a good fit for them, so they set a date for the installation.

Our PolyLevel experts, Brandon Wiskow and Jared Wroblewski, drilled penny-sized holes into the concrete slabs where the concrete needed to be raised. They injected the PolyLevel foam into the holes in the concrete until the slabs were raised and level. Lastly, they filled the cracks in the concrete with our Nexus Pro sealant. The process only took a couple hours, and now the Church will be able to enjoy level concrete for years to come!

Do you have sunken and uneven concrete? Click here for your FREE estimate!

Carrie S. in Elgin, MN had a sunken front stoop that was sloping downwards towards her house and one of the steps had sunk a couple of inches. She contacted us for a free estimate, so we sent one of our Design Specialists, Don Mancilman, to her home to provide her with a solution. Don assured that her that we could level and raise her stoop using our PolyLevel foam injection. She was pleased to learn that our concrete repair solution is durable, faster and more affordable than traditional concrete repair, so she went ahead with the installation.

One of our PolyLevel experts, Jared Wroblewski, drilled penny-sized holes into her concrete stoop where it needed to be raised. He then injected the PolyLevel foam until the concrete was raised and leveled. Lastly, he filled the cracks in the concrete with our Nexus Pro sealant. The process was non-invasive, and it only took a couple of hours. Now Carrie will be able to enjoy a level stoop for years to come!

Do you have sunken and uneven concrete? Click here for your FREE estimate!

Marilyn P. in Zumbro Falls, MN was tired of dealing with a sunken driveway. It was continuously getting worse over time, and it had become a trip hazard for her and her husband. They saw a commercial for American Waterworks on television and decided it was time to contact us for a free estimate. We sent our Design Specialist, Don Mancilman, to their home to inspect the situation and design a solution for them. They were excited to hear that our PolyLevel concrete repair option is a durable, faster and more affordable alternative to traditional concrete repair. They liked the proposal that Don developed for them, so they set a date for the installation.

Our Foreman, Jared Wroblewski, and Co-Foreman, Trevor Ellingson, drilled small holes throughout the concrete slabs that needed to be raised. Next, they injected the foam into the holes until the slabs were raised back to their original position. They covered up the holes with concrete and then sealed the cracks in the concrete with our Nexus Pro sealant. The entire process only took 3 hours, and now Marilyn and her husband are able to enjoy level concrete for years to come. They are thrilled with the outcome and happy with how quick and non-invasive the project was. We are happy we were able to restore their peace of mind!

Sarah S. in Kellogg, MN learned about the dangers of radon exposure, so she decided to have her home tested. She contacted American Waterworks to receive a free test. We sent a Design Specialists to her home to set up the test kit and walk her through a solution if her home tested high for radon. The EPA recommends mitigation if the test results are at 4 pCi/L or higher, which is still the equivalent of breathing in 10 cigarettes a day. Sarah’s home tested at 9 pCi/L, so she was eager to have a mitigation system installed as soon as possible.

Our crew started installing the mitigation system by inserting a PVC pipe through the sump pump to create a suction point. Then, they ran the PVC pipe up and out of the house, with a fan connected near to top of pipe to ensure that the radon gas would be pushed out and away from the home. The installation only took a few hours to complete, and now Sarah can rest easy knowing that the radon in her home has been dramatically reduced. The test following the installation showed that her home was now reporting levels of only 1.3 pCi/L. She was thrilled with the results and is relieved that she took the appropriate steps to protect her and her family’s health.

Kelly and David K. of Millville, MN had water leaking into their basement and was sick of having to keep up on the maintenance. She got ahold of our American Waterworks call representatives to set up a Free Estimate. We sent out our Design Specialist, Dustin Loftus, to examine the problem and come up with a solution. After a thorough inspection, they went ahead with the project and scheduled the installation date.

Our foreman, Arturo Mares, and his production crew began the installation by cutting out the concrete around the perimeter of their basement to make a waterway. In the waterway, our crew installed our WaterGuard Drainage System, which prevents water clogs and catches leakage from the walls. Next, our crew installed our SuperSump Pump M53, a sump pump designed to keep basements clean and dry for long periods of time, especially during heavy thunderstorms or flooding. Then, they installed a discharge line from the sump pump to our IceGuard System outside of the home. The IceGuard is a waterproofing system that provides an extra block of protection against basement flooding, especially when freezing temperatures are problematic. The discharge line ended at the LawnSpace Outlet; a pipe buried from the downspout that lets all the water waste out. To complete the installation, Arturo and his crew covered all of the open gaps in the basement with rock and replaced the broken-out concrete. Kelly and David were satisfied and content that American Waterworks was able to help them out at their time of need!

A female homeowner of Reads Landing, MN had a sunken and cracked concrete slab causing her to worry about the stability and value of her concrete. She found an American Waterworks advertisement on television, so she called our office line and scheduled a FREE estimate with our Design Specialist, Brian. Brian went to the homeowner's house, inspected her concrete issues, and proposed the solution of our PolyLevel and NexusPro, both of which are made to lift and stabilize the concrete surface, as well as repair and seal the cracks. The homeowner was confident in the proposal and got all of her questions answered, so she signed the contract, put down a deposit, and got a date scheduled for the project. 

Is your concrete sinking or cracking? Give us a call today to schedule your FREE estimate! 

A homeowner in Wabasha, MN, noticed a foul odor around their home. Uncertain where the scent was coming from, the homeowner hunted their home for the source. After some investigating, the homeowner determined that the smell was coming from their basement. From this point, the homeowner knew that a professional to step in and look further. The homeowner began looking for the best basement service company near them. One of the first companies to show up on their hunt was us, American Waterworks. After seeing our stellar reviews, the homeowner looked into all the services we offer. The homeowner was impressed by our service lineup and decided to sign up for their FREE estimate. Once the estimate details were finalized, the homeowner prepared for the arrival of Mike, one of our Design Specialists. Upon Mike's arrival, he introduced himself to the homeowners and began the evaluation of the basement. Following his evaluation, Mike found that the smell was coming from the crawl space. Additionally, Mike discovered that the radon levels in the home were alarmingly high. Mike alerted the homeowners of the issues he discovered in their home and how they could cause long-term damage. After warning the homeowner, Mike also provided them with a solution that would solve all their issues. The homeowners agreed and production began. First, the crew cleaned out the debris in the crawl space. Then, they shifted their focus to installing the Drainage Matting on the crawl space floor. The Drainage Matting keeps your crawl space protected, and water directed into your drainage system. Next, the crew installed CleanSpace on the crawl space floors and walls. CleanSpace is a 100% waterproof plastic vapor barrier that is ideal for unfinished basement walls. Once the crawl space was encapsulated, the crew shifted their focus to installing the Radon Mitigation System outside their home. The Radon Mitigation System will lower the concentration of radon gas in your interior air to the minimal levels recommended by the EPA and other health agencies. After the system was installed, the crew was able to clean up the site and leave the home. The homeowners were thankful for the wonderful job completed by the crew. If you are experiencing an issue, sign up for your FREE estimate today! 

In Elgin, MN a homeowner was wanting to make a change to her front concrete spaces, including the walkway and stoop. She was eager to find an effective solution that wouldn't break the bank, so she asked her family and friends for some recommendations. After compiling all of the suggestions into a list of possible companies that could help out, she focused on one of them, American Waterworks, because of our FREE no-obligation estimates. She decided to contact our appointment center and sign up for her own estimate to learn more from one of our experts about the products and services we offered. Design Specialist Dustin Loftus arrived at the home to speak more with the homeowner and come up with some recommendations for repairs. Dustin explained to the homeowner that using the super duo of our PolyLevel and NexusPro products would work to lift and seal the concrete just as she was wanting. The homeowner was glad to hear this and agreed to the installations. Later, one of our Foremen, Patrick Burnes, and his crew went to the site and began the process by drilling small pencil-sized holes in the concrete. Then, they inserted ports through the holes to connect to the empty space below the surface and completed the PolyLevel injection to lift the slabs. Next, they filled in the holes and the large joint in between the walkway and stoop with NexusPro sealant. To finish, they sprinkled some native sand on top of the sealant for a smooth look and the homeowner was thrilled with how the project turned out.

If you're facing similar concrete problems, don't hesitate to reach out to us and receive your FREE estimate!

A homeowner in Plainview, MN, noticed their driveway had significantly dropped from their garage floor. Instead of letting the issue worsen, the homeowner knew they needed professional assistance. The homeowner heard of a new way to lift sunken concrete, PolyLevel. After hearing about this product, the homeowner began looking into companies that offer this service. One of the first companies to show up was us, American Waterworks since they were so close to the Plainview. The homeowner knew we were a reputable company, so they called our Appointment Center and signed up for their FREE estimate. After the estimate was finalized, one of our Design Specialists, Nate, drove to the home to complete the inspection. Nate arrived and the homeowner showed him where the troublesome areas were. After Nate took a closer look, he determined that it was sinking due to settlement and needed to be lifted back to its original state. Nate proposed that the sidewalk be lifted and leveled with our PolyLevel solution. Additionally, Nate recommended taking out the old joints and replacing them with the NexusPro solution. The homeowner liked Nate's plan, so they decided to go ahead with his recommendations. Next, Nate passed along his plans to our office and then they were sent to our Foreman, Patrick. Once Patrick received the plans, he and his crew traveled to the home to start the PolyLevel installation. First, the crew inserted PolyLevel underneath the driveway and sidewalk. PolyLevel is a polyurethane foam injection solution that restores the appearance and safety of the concrete. The crew started by strategically drilling small holes throughout the slab. Then, the crew inserts ports into those small holes. Next, the polyurethane foam is injected beneath the concrete to fill voids and raise the slabs. Finally, the holes and control joints are sealed. Once the PolyLevel injection was finished, the crew shifted their focus to filling the cracks and replacing the joints. The crew utilized NexusPro Sealant, a silicone-based sealant for joints and cracks formulated to provide long-lasting flexibility and withstand harsh weather conditions. The crew begins by drilling, smoothing, and preparing the non-absorbent backer rod filler. Then, the NexusPro sealant is inserted in the prepared crack or control joint. Finally, the cracks are detailed with a thin layer of native sand, giving the concrete a uniform, finished appearance. After all the products were installed, the crew cleaned up their materials and left the home. The homeowner was pleased with the job well done by the crew. If you are experiencing a similar issue, sign up for your FREE estimate today! 

A homeowner in Wabasha, MN, got in touch with us when her friends recommended her to us. She had been dealing with a failing wall for a few years and was growing more uneasy about what that could spell for her home. She decided to take advantage of her FREE estimate and a few weeks later our Design Specialist, Michel, headed out to her home to see what we could do. 

Once his inspection was completed, Michel met with the homeowner to go over his findings and make his recommendations. Michel informed her that her foundation was showing signs of settling, which is common in older homes. He assured her she made the right choice by contacting us. He went on to say that he believed the wall could be stabilized with the use of our helical piers, steel piers with a set of helical blades on the lower section. These piers are mechanically advanced into the soil using small construction equipment or hand equipment. As they are installed to appropriate depths and capacities, they prevent any future settlement issues. The homeowner agreed with Michel's recommendations; the project was scheduled to begin a few weeks later. 

On the day of the installation, our Foreman, Luis, and his team began by excavating the soil away from the wall in question. Next, Luis used a piece of construction equipment to mechanically "screw" the piers into the soil. Once at proper depth and capacity, heavy-duty steel foundation brackets are positioned below and against the foundation footing. The weight of the home is then transferred through the helical piers to deep, competent soils. Then lifting the home back towards its original position is attempted. To finish the project, all the displaced soil is carefully replaced. Luis and his team installed 3 of our helical piers. 

Now our homeowner can rest easily knowing her foundation issues have been conquered! 

A Plainview, MN, homeowner was struggling with an issue in his basement. Each time it rained, he observed tiny puddles forming in the corner of his room. He looked up basement waterproofing images online and became nervous about what the onslaught of water could do to this home. He decided to google "interior basement waterproofing near me", and eventually found our website. He decided to sign up for his FREE estimate, and several weeks later, our Design Specialist, Darin, headed out to the home. 

Darin got right to work conducting his thorough inspection. When he finished, he met with the homeowner to go over their next steps and to form a game plan. Darin informed the homeowner that he was right to call, as water damage is usually easier and cheaper to catch early on versus further down the road after lots of damage has been done. Darin wanted to use two of our products to work together to keep the homeowner's basement dry. First, Darin recommended the installation of our WaterGuard, a unique French drain that gets installed below the floor but atop the footing of the foundation, keeping it out of the mud zone, where other drains of this nature tend to clog.  The drain works to collect water leaking from the basement wall, directing it to the proper disposal site, like a sump pump or discharge line. For the disposal site, Darin recommended our SuperSump sump pump. He explained that this pump was the perfect mix of effective and affordable, as it's engineered to help keep basements dry, even during times of heavy water intrusion. It boasts a powerful Zoeller® ⅓ horsepower cast-iron sump pump, capable of pumping 2,220 gallons of water per hour at an 8-foot head out of your basement. The homeowner liked the idea of the two products working hand in hand and decided to schedule his project for a month later. 

On the day of the installation, our product crew, led by their Foreman, Kiko, headed out to the home to begin the project. First, they dug a trench around the perimeter of the basement for the placement of the sump. At the same time, they excavated a section of the basement for the placement of the sump pump. Next, one part of Kiko's team got to work laying the WaterGuard in the trench, while the other half built and installed the sump pump. Next, they covered the WaterGuard with a fresh layer of drainage stone and connected the WaterGuard to the SuperSump. To finish off the project, they covered the WaterGuard in a fresh layer of concrete to keep it in place. Now, our customer can enjoy his basement without worrying about stepping in any puddles!

Do you have a leaky basement you'd like to get taken care of? Click HERE to take the first steps towards a dry basement!