Your Foundation Repair & Concrete Leveling Expert in White Bear Lake, MN

A homeowner in White Bear Lake, MN, noticed that her front porch had begun settling impacting her home's curb appeal. As the type of homeowner who takes pride in her home, she decided to look into concrete lifting in the area and found our website. After browsing our website, she was extremely impressed with our concrete before and after photos and contacted us to schedule her FREE estimate. 

In a couple of weeks, our Design Specialist, Ryan P., arrived at the home to thoroughly inspect the concrete and to answer any questions the homeowner had. He explained to the homeowner that one of the common causes of settling concrete slabs is soil washout. When it rains or floods, water moves through the ground and washes away the supporting soils holding up the slabs. Over time, this causes gaps and empty spaces to form in the soil leading to settling slabs. For this reason, Ryan recommended PolyLevel, our waterproof polyurethane formula that is designed to accurately level concrete, and NexusPro, our silicone-based sealant to seal the joints. After reviewing Ryan's proposal, the homeowner happily agreed and decided to move forward and schedule the project.

In about a month, our crew arrived at the home for the installation. They began by drilling small holes into the slabs and inserting the injection ports. PolyLevel is then injected beneath the slab, expanding and filling in the spaces in the soil. Once the slab has been lifted, the crew ensures it is level before sealing the holes with cement. Lastly, the crew uses NexusPro to seal the joints. After they were done with the installation, they cleaned up their equipment and left the home.

Now, our customer has a stable and leveled porch! Are you experiencing something similar? Click HERE and schedule your FREE estimate today!

A homeowner in White Bear Lake, MN was concerned when he noticed that his walkway had begun sinking causing it to lean to one side. Worried that it would be a trip hazard, the homeowner decided to search for, "best concrete lifting contractor" and found our website. After browsing our website, the homeowner grew impressed with our before and after photos and contacted us to schedule his FREE estimate. 

In a couple of weeks, our Design Specialist, Kyle P., arrived at the home to answer any questions or concerns the homeowner had and to conduct a thorough inspection of the walkway. Kyle informed the homeowner that one of the common causes of settling concrete is soil washout. When it rains or floods, water moves through the ground beneath concrete slabs and washes away supporting soils. Over time, gaps and voids are created in the soil causing the slab to sink and form cracks. For this reason, Kyle recommended our PolyLevel, a waterproof high-density polyurethane formula that allows for the accurate lifting of concrete slabs, and NexusPro, a silicone-based sealant with high flexibility and durability. The homeowner happily agreed to Kyle's recommendation and decided to move forward with the project. 

In about a month, our Foreman, Troy J., and his crew arrived at the home for the installation. They began by drilling small holes into the slab and inserting the injection ports. PolyLevel is then inserted, filling in the empty spaces in the soil. Once the slab has been lifted, the crew ensures it is level before sealing the holes with cement. Lastly, the crew used NexusPro to seal the cracks and joints of the walkway. After they were done with the installation, they cleaned up their equipment and left the home.

Now, our customer can have peace of mind knowing his walkway and smooth and no longer a trip hazard! Have you noticed sunken concrete on your property? No worries! Click HERE and schedule your FREE estimate today!

A homeowner in White Bear Lake, MN, noticed standing water along the floors of her basement and knew something was wrong with her basement waterproofing system. She decided to contact us to schedule her FREE estimate as we had installed one of our sump pumps in her basement 10 years ago.

In a couple of weeks, our Design Specialist, Daniel R., arrived at the home to conduct a thorough inspection of the basement. He tested the sump pump, and it was working properly, so Daniel concluded that the footing drain must have failed. The footing drain typically fails when soil or debris clogs the drain system, causing water to enter through the joint between the footing and the wall, through cracks on the walls, or under the footing. For this reason, Daniel recommended installing our WaterGuard around the perimeter of the rooms where the issue was. Our WaterGuard is our below-the-floor perimeter drain system that is designed not to clog, unlike traditional drain systems. After the homeowner reviewed Daniel's proposal, she happily agreed and decided to move forward with the project.

In a couple of months, our Foreman, Francisco E., and his crew arrived at the home for the installation. They installed 46ft of WaterGuard, and these are installed by jackhammering the perimeter of the basement and setting down rocks. The WaterGuard would then rest on top and is backfilled with more clean rocks. The crew then ensures the WaterGuard is connected to the sump pump before restoring the flooring by pouring concrete. After the crew was done, they cleaned up their equipment and left the home. 

Now, our customer can have peace of mind with her dry basement! Have you noticed standing water in your basement? Schedule your FREE estimate with one of our experts by clicking HERE!

A homeowner in White Bear Lake, MN, noticed their front step was sunken significantly. Unsure of the cause, the homeowner wanted to find answers. Hoping to avoid concrete replacement, the homeowner looked into "poly concrete lifting near me". One of the first companies to catch their attention was us, American Waterworks. Impressed with our stellar ratings and reviews, the homeowner knew we were the perfect company for their project. The homeowner called our Appointment Center and signed up for their FREE estimate. Once the estimate was set, we sent one of our Design Specialists, Gary, to the home to take a closer look. Gary promptly arrived at the home and thoroughly inspected the concrete. Gary determined the sidewalk was sinking due to settlement. To prevent the settlement from continuing, Gary recommended installing PolyLevel underneath the struggling concrete. Since it avoided concrete replacement, the homeowner knew we were this was their best plan of action. Next, Gary passed the proposal to our Logistics team to give the final stamp of approval. Our Logistics team approved the plans and scheduled the project for a few weeks later. Once the project date arrived, our Foreman, Troy, and his crew traveled to the home to begin the installation. Troy and his crew promptly arrived at the home and began the lift. First, Troy and his crew used PolyLevel to lift the concrete back into place. The PolyLevel is a polyurethane foam injection solution that restores the appearance and safety of the concrete. The crew started by strategically drilling small holes throughout the slab. Then, the crew inserts ports into those small holes. Next, the polyurethane foam is injected beneath the concrete to fill voids and raise the slabs. Finally, the holes and control joints are sealed. Once the PolyLevel injection was finished, the crew shifted their focus to filling the cracks and replacing the joints. The crew utilized NexusPro Sealant, a silicone-based sealant for joints and cracks formulated to provide long-lasting flexibility and withstand harsh weather conditions. The crew begins by drilling, smoothing, and preparing the non-absorbent backer rod filler. Then, the NexusPro sealant is inserted in the prepared crack or control joint. Finally, the cracks are detailed with a thin layer of native sand, giving the concrete a uniform, finished appearance. After the products were secured, the crew cleaned up their materials and left the home. The homeowner was delighted with the excellent work completed by the crew. If you notice your home is suffering from a similar issue, sign up for your FREE estimate today! 

A homeowner in Gem Lake, MN, noticed that his driveway apron was uneven and was worried it would lower the resale value of his home. He decided to search for concrete lifting services in the area and found our website. After browsing our website, he was impressed with our 5-star reviews. Confident we would do the job correctly and efficiently, he contacted us to schedule his FREE estimate. 

In about a month, our Design Specialist, Gary S., arrived at the home to inspect the driveway and garage. He informed the homeowner that one of the common causes of an uneven driveway is soil washout. When it rains or floods, water moves beneath the concrete slabs and washes out the supporting soils. As this continues, it leads to voids in the soil and causes the slab to sink. For this reason, Gary recommended our PolyLevel to lift the concrete slabs and NexusPro to seal the joints of the garage apron. The homeowner happily agreed to Gary's recommendations and decided to move forward with the project.

In a couple of weeks, our Foreman, Troy J., and his crew arrived at the home for the installation. He began by drilling small holes into the concrete slabs and installing the injection ports. PolyLevel is then injected beneath the slab. Once the concrete slabs have been lifted, the crew ensures it is leveled before sealing the holes with concrete. Lastly, the crew uses NexusPro to seal the joints. After they were done, they cleaned up their equipment and left the home. 

Now, our customer can have peace of mind with his driveway leveled! Do you have an uneven driveway? Click HERE and schedule your FREE estimate with one of our experts!

A homeowner in Gem Lake, MN, noticed their driveway apron no longer matched their driveway. Worried this could cause damage to their cars, the homeowner began looking for a solution. Hoping to avoid concrete replacement, the homeowner looked into "concrete leveling near me". One of the first companies to stand out to them was us, American Waterworks. After seeing our eye-catching before and afters, the homeowner knew we were the ideal company for their project. The homeowner called our Appointment Center and signed up for their FREE estimate. Once the estimate was set, the homeowner awaited the arrival of our Design Specialist, Gary. Gary promptly arrived at the home and started investigating. While taking a closer look at the concrete, Gary discovered it was sinking due to settlement. To stop the settlement from continuing, Gary recommended lifting and leveling the driveway apron back to its original position. The homeowner decided to go ahead with Gary's recommendations, so he passed them along to our Logistics team to approve and build the project. Our Logsitics team finalized the plan, then scheduled it for the following weeks. Once the project date arrived, our Foreman, Troy, and his crew traveled to the home to begin the PolyLevel installation. First, Troy and his team focused on lifting the driveway apron back to its original position. The PolyLevel is a polyurethane foam injection solution that restores the appearance and safety of the concrete. The crew started by strategically drilling small holes throughout the slab. Then, the crew inserts ports into those small holes. Next, the polyurethane foam is injected beneath the concrete to fill voids and raise the slabs. Finally, the holes and control joints are sealed. Once the PolyLevel injection was finished, the crew shifted their focus to filling the cracks and replacing the joints. The crew utilized NexusPro Sealant, a silicone-based sealant for joints and cracks formulated to provide long-lasting flexibility and withstand harsh weather conditions. The crew begins by drilling, smoothing, and preparing the non-absorbent backer rod filler. Then, the NexusPro sealant is inserted in the prepared crack or control joint. Finally, the cracks are detailed with a thin layer of native sand, giving the concrete a uniform, finished appearance. Finally, the crew cleaned up their materials and left the home. The homeowner was delighted with the results and left a five star review. If you are experiencing a similar issue, sign up for your FREE estimate today!