American Waterworks Before & After Photos

A homeowner in New Hampton, IA, noticed their driveway was sinking past their garage apron. Worried this could cause significant damage, the homeowner began looking into garage apron repairs are New Hampton, IA. The homeowner's eye was caught by our high ratings and reviews, so they decided to take a closer look at our website. After taking a closer look, the homeowner knew we were the perfect company for the job. The homeowner called our Appointment Center and signed up for their FREE estimate. Once the estimate was set, the homeowner awaited the arrival of our Design Specialist, Brad. Following his arrival, Brad introduced himself to the homeowner and began the detailed inspection of the garage floor. Brad concluded that the garage apron was sinking into the ground and needed to be lifted back into place. Knowing this was their best option, the homeowner agreed with Brad's proposal. Next, Brad sent the plans back to our office to schedule and build the project. Once the project was built, Brad passed the plans along to our Foreman, Patrick, and his crew. Patrick and his crew traveled to the home and began the PolyLevel installation. First, the crew installed PolyLevel underneath the driveway, garage, and garage apron. Once these areas were lifted, the crew filled and replaced the cracks using NexusPro, a silicone-based solution. After all the products were installed, the crew cleaned up their materials and left the home. The homeowner was impressed with the excellent work completed by the crew. American Waterworks is delighted to assist its customers in lifting their driveway back to its original position. 

A homeowner in New Hampton, IA, knew it was time to have their cracked, unstable walls repaired. Unsure who to work with, the homeowner asked their neighbors for recommendations. Their neighbors recommended working with us, American Waterworks, so the homeowner decided to take a closer look at our company. After seeing our impressive ratings and reviews, the homeowner knew we were the best company for the job. The homeowner called our Appointment Center and signed up for their FREE estimate. Once the estimate was set, the homeowner awaited the arrival of Brady, one of our Design Specialists. After Brady arrived at the home, he began the thorough walk-through of the basement. Brady found that the walls were showing early signs of wall failure. To stop the failure from continuing, Brady recommended installing several wall stabilizing products. The homeowner agreed with Brady's proposal, so he sent the plans to our Logistics team for approval. After the plans were approved, they were assigned to our Foreman, Jesus, and his crew to begin. Jesus and his crew traveled to New Hampton and began the installation. First, Jesus and his crew began by installing 16 PowerBraces along all the walls. Next, the crew shifted their focus to installing three Carbon Armor strips on the wall. Finally, the crew installed seven SmartJacks on the walls. After all the products were secured, the crew cleaned up their materials and left the home. The homeowner was relieved to know their walls were properly secured and stable. American Waterworks is happy to stabilize its homeowner's struggling foundation walls. 

A homeowner in New Hampton, IA, grew concerned their crawl space was in serious trouble. Unsure of the cause, the homeowner began looking into crawl space repair near New Hampton, IA. The homeowner looked through several companies and their eye was caught by our five-star ratings and reviews. Impressed with our work, the homeowner knew we were the best company for the job. Since they were already on our website, the homeowner decided to sign up for their FREE estimate. As soon as the estimate was set, we sent one of our Design Specialists, Ryan, to the home to take a closer look. Ryan arrived at the home and began his thorough investigation of the crawl space. During his investigation, Ryan confirmed the crawl space needed to be cleared and encapsulated. Ryan presented his findings and proposal to the homeowner. Knowing this was their best option, the homeowner decided to go ahead with Ryan's proposal. Next, Ryan sent the proposal to our Logistics team to have the plans approved. Our Logistics team built and scheduled the project, and then it was assigned to our Foreman, Kiko, and his crew. As soon as Kiko and his crew arrived, they began by clearing out the crawl space. Once the crawl space was cleared, the crew shifted their focus to installing Drainage Matting on the crawl space floor. Following the Drainage Matting, the crew shifted their focus to installing TerraBlock on the crawl space floor. Next, the crew attached CleanSpace to the crawl space walls and floors. Finally, the crew finished up by installing Foamax on the outside crawl space walls. After Kiko and his crew completed the installation, they cleaned up their materials and left the home. The homeowner was delighted with the excellent work completed by the crew. American Waterworks is delighted to assist its homeowners in repairing their crawl space. 

Steve in Lanesboro, MN had a concrete driveway that had sunk roughly two inches after the change in season, so he started researching concrete lifting options. He was interested in learning more about our polymer foam solution, so he contacted us for a FREE estimate. Our Design Specialist went onsite to inspect his concrete and develop a personalized solution. Steve was pleased to learn that PolyLevel is a faster, more durable and less invasive method compared to mudjacking.

Our concrete repair experts drilled small holes into the concrete and injected the polymer foam. The foam fills the voids under the concrete and expands, causing the concrete to be lifted. They injected the foam until the concrete slabs were level with the garage floor. This process only took a couple of hours to complete, and now Steve can enjoy beautiful, safe concrete for years to come!

Interested in learning more about our concrete solutions? Click here!

A homeowner in Lanesboro, MN, was clearing snow off their driveway when they noticed a significant height gap. Wanting to have a long-term solution, the homeowner looked into concrete repair options near them. Hoping to avoid mud jacking, the homeowner wanted to find alternative concrete solutions. The homeowner saw that our company offered PolyLevel, a polyurethane foam solution. Once they saw we offered PolyLevel, the homeowner knew we were the best option for them. The homeowner called our Appointment Center and signed up for their FREE estimate. After the estimate was set, the homeowner awaited the arrival of Michel, one of our Design Specialists, to inspect the concrete. Michel arrived at the home and introduced himself to the homeowner. The homeowner then showed Michel the problematic area. Michel noticed the driveway was showing signs of settlement. To stop the settlement from continuing, Michel recommended lifting the area back to its original state. After hearing Michel's recommendations, the crew decided to go ahead with the plan. The plans were finalized by the office and then were passed along to the crew. Our Foreman, Patrick, and his crew were assigned to complete the project. Once they arrived, the crew started by lifting the problem area with PolyLevel, our polyurethane foam injection solution. The crew lifted the entire driveway to meet the foundation and garage slabs. Once the driveway was lifted to its original state. the crew cleaned up their materials and left the home. The homeowner was in awe of the process and was grateful for the week completed by the crew. American Waterworks is happy to restore its customer's sinking concrete.