Concrete Leveling Before & After Photos

A homeowner in Saint Bonifacuis, MN, noticed their driveway was quite bumpy when they drove home. Unsure why it was uneven, the homeowner began looking into repair options near them. Hoping to avoid total concrete replacement, the homeowner began looking into concrete lifting and leveling services throughout central and south Minnesota. One of the top companies to catch their eye was us, American Waterworks, so they went to our website to take a closer look. After taking a closer look at our services, the homeowner decided to sign up for their FREE estimate. Once the estimate was set, the homeowner awaited the arrival of one of our Design Specialists, Ryan, to perform the inspection. Ryan arrived at the home and began his detailed investigation of the driveway. During his investigation, Ryan determined the driveway was sinking due to soil settlement. To stop the driveway from sinking further, Ryan recommended lifting the sidewalk using PolyLevel, a polyurethane foam injection solution. The homeowner agreed with Ryan's recommendations and the plans were directed to our Foreman, Sam, and his crew. After they received the plans, Sam and his crew traveled to the home to begin the project. First, Ryan and his crew started by lifting the driveway using PolyLevel, a polyurethane foam injection solution. Once the driveway was lifted back to its original height, the crew could clean up their materials and leave the home. The homeowner was impressed with the progress and work completed by the crew. American Waterworks is happy to repair its customer's sunken driveway. 

Ann S. of Saint Bonifacius, MN had uneven concrete near her front porch, causing safety concerns. She did research on our website and filled out our online FREE Estimate form. Our Design Specialist, Jeremy Radtke, went to her home to inspect the issue and come up with a solution. Ann got all of her questions answered, so she followed through with the project. 

Our Foreman, Brandon Wiskow, and his crew member drilled holes in the concrete and injected our PolyLevel into each hole to raise and stabilize the concrete surface. Our PolyLevel is a dense foam that cures within minutes. Brandon and his crew member had the project completed in one day, and made sure Ann was happy with the work! 

A homeowner in Warsaw, MN, had noticed the concrete around their home had begun sinking, causing the area to become uneven. Knowing the issue would persist unless it is addressed, the homeowner began searching for concrete repair in the area and found us. After browsing our website and becoming impressed by our reviews, the homeowner contacted us to schedule their FREE estimate. 

In less than a week, our Design Specialist, Kevin B., arrived at the home to conduct a thorough inspection of the concrete. During the inspection, he took a close look at the problem areas and measured how far the slabs had begun sinking. After reporting his findings to the homeowner, Kevin recommended lifting the slabs with PolyLevel, our foam solution, and sealing the joints with NexusPro, our silicone-based sealant. After looking over the proposal, the homeowner happily agreed.

In about a month, our Foreman, Troy J., and his crew arrived at the home to lift the concrete slabs. The crew began by drilling small holes into the slabs. Next, PolyLevel is injected beneath, lifting the slabs back to their original position. In about a week, our Foreman, Ryan T., and his crew arrived to apply NexusPro along the joints.

Now, our customer can have a smooth and level driveway! Are you experiencing something similar? Click HERE to schedule your FREE estimate today!

A homeowner in Delano, MN, was concerned that his settled concrete slabs would be a trip hazard for guests and family members, so he decided to look into concrete lifting in the area. The homeowner then found our website and was extremely impressed with our concrete before and after transformations so he contacted us to schedule his FREE estimate. 

In a couple of weeks, our Design Specialist, Gary S., arrived at the home to provide a thorough inspection of the problem areas, answer any questions, and provide the best solution for the homeowner. Gary explained to the homeowner that soil washout is one of the most common causes of settled slabs. When it rains or floods, water moves through the ground and washes away supporting soil, keeping the slab upright. For this reason, Gary recommended PolyLevel, our waterproof foam expanding formula that accurately lifts sinking slabs, and NexusPro, our silicone-based sealant that is engineered to provide flexibility and long-lasting durably. The homeowner happily agreed, and Gary's design was sent to our Foreman, Sam K.

In about two weeks, Sam and his crew arrived at the home for the installation. They began by drilling small holes into the slabs and inserting the injection ports. PolyLevel is then injected beneath the slab, causing it to lift. Once it is lifted to the desired level, the crew seals the holes with cement. Lastly, they used NexusPro to seal a few of the joints. After they were done, they cleaned up their equipment and left the home.

Now, our customer has a smooth and level walkway! Have you noticed sunken concrete on your property? Schedule your FREE estimate today by clicking HERE!

Donnie A., the President of a townhome association in Delano, MN, had previously met with one of our Design Specialists, Chad Johnson, and was impressed with his professionalism and the products American Waterworks has to offer. So, when the townhome association started seeing issues with sinking concrete, he knew Chad was the guy to call. Chad presented Donnie with our PolyLevel concrete repair option, and Donnie was glad to learn that PolyLevel is a more durable, non-invasive alternative to mudjacking or total concrete replacement with a much quicker installation and cure time. The board approved of the plan and moved forward with the project. 

Our Foreman, Brandon Wiskow, and Co-Foreman, Tyler Brockway, drilled small holes throughout the concrete slabs that needed to be raised. Next, they injected the foam into the holes until the slabs were raised back to their original position. They covered up the holes with concrete and then sealed the cracks in the concrete with our Nexus Pro sealant. The board members and homeowners were thrilled with the results and happy they can enjoy beautiful and level concrete for years to come!