Concrete Leveling Before & After Photos

A homeowner in Anoka, MN, was concerned that the concrete slab in front of her door had caused a trip hazard. Knowing the issue could not wait, the homeowner began searching for concrete repair in Anoka, MN, and found us. After looking through our website and becoming impressed by our reviews, the homeowner contacted us to schedule her FREE estimate. 

In less than a week, our Design Specialist, Greg G, arrived at the home to provide a thorough inspection of the problem area. During the inspection, he noticed that the slab had begun tilting one way, causing a big gap for a trip hazard. After taking a close look at the area, Greg created a proposal for the homeowner. In that proposal, Greg recommended installing PolyLevel to lift the sinking slabs and NexusPro to seal the joints. The homeowner did not want to go through the troubles of mudjacking or slab replacement, so she knew that PolyLevel was going to be her best choice. She then contacted us to schedule the installation date. 

In about a month, our Foreman, Patrick B., and his crew arrived at the home for the installation. The crew began by drilling small holes along the slabs. Polylevel is then injected beneath it, filling in the voids in the soil and causing the slab to lift. Once it has been lifted and leveled, the crew seals the holes. Lastly, the crew used NexusPro to seal the joints. After they were done, they cleaned up their equipment and left the home.

Now, our customer can have a smooth walkway! Are you experiencing something similar? Click HERE to schedule your FREE concrete estimate today!

A homeowner in Anoka, MN, noticed that the concrete slabs along his walkway had begun sinking, causing the area to become uneven. Knowing how this negatively affected the curb appeal of his home, he decided to search for concrete repair in Anoka, MN, where he found us. After looking through our website, the homeowner grew impressed by our reviews and decided to contact us to schedule his FREE estimate. 

In less than a week, our Design Specialist, Kyle P., arrived at the home to provide a thorough inspection of the problem areas. During the inspection, Kyle explained to the homeowner that soil washout is one of the most common causes of sinking concrete. Soil washout is the process in which water moves through the ground and washes away the supporting soils, keeping the slabs upright. Over time, this causes voids in the soil, and the slab would begin to sink. To effectively fix this issue, Kyle recommended PolyLevel, our waterproof foam expanding formula that will accurately lift sinking slabs, and NexusPro, our silicone-based sealant specifically engineered to repair cracks and seal joints. After reviewing Kyle's proposal, the homeowner happily agreed to his recommendations and scheduled the installation date.

In about a month, our Foreman, Sam K., and his crew arrived at the home for the installation. The crew began by drilling small holes into the concrete slabs of the walkway. Then, they injected PolyLevel beneath the slab, causing it to lift. Once it has been lifted to the desired height, the crew seals the holes. Lastly, they used NexusPro to seal the joints. After the crew was done with the installation, they cleaned up their equipment and left the home.

Now, our customer can have a smooth and level walkway! Are you experiencing something similar? Click HERE to schedule your FREE estimate today!

A homeowner in Anoka, MN, noticed that the slabs along his driveway have begun sinking, causing the area to be bumpy. Frustrated every time he has to drive over it, he knew it was time to get it fixed. He began looking into concrete repairs in Anoka, MN, and found us. After looking through our website, he knew we were the best choice due to our stellar reviews and before-and-after photos. The homeowner then contacted us to schedule his FREE concrete estimate. 

In less than a week, our Design Specialist, Kyle P., arrived at the home to provide a thorough inspection. During the inspection, Kyle explained to the homeowner that soil compaction is the likely reason the slabs have begun sinking. When a soil's load-bearing capacity exceeds (in this case, as a car drives over it), it causes the soil to compact and settle beneath the slab. To fix this issue, Kyle recommended installing PolyLevel, our high-density foam expanding formula that lifts sinking slabs, and NexusPro, our silicone-based sealant to repair any cracks and seal the joints. After reviewing Kyle's proposal, the homeowner happily agreed because he did not want to go through the troubles of mudjacking or slab replacement. 

In about a month, our Foreman, Ryan T., and his crew arrived at the home for the installation. The crew began by drilling small holes into the concrete slabs. Then, PolyLevel is injected beneath the slab, compacting the soil and lifting the slab. Once all of the slabs have been lifted so that it is level, the crew seals the holes. Lastly, they applied NexusPro along the cracks and joints. After the crew was done with the installation, they cleaned up their equipment and left the home.

Now, our customer can have a smooth driveway and walkway! Are you experiencing something similar? Click HERE to schedule your FREE estimate today!

A homeowner in Anoka, MN, was concerned when he noticed that the concrete slabs along his driveway had begun sinking. Knowing that the issue would not fix itself, the homeowner began searching for concrete repairs in Anoka, MN, and found us. After looking through our website and being impressed by our commitment to customer satisfaction, the homeowner contacted us to schedule his FREE estimate. 

In less than a week, our Design Specialist, Kyle P., arrived at the home to provide a thorough inspection of the concrete. During the inspection that soil washout is one of the most common causes of sinking concrete slabs. Soil washout is the process in which water moves through the ground and washes away the supporting soils that are keeping the slabs upright. Over time, this causes voids in the soil, and the slabs would begin to sink. In this case, the slabs appear to be leaning down on one side. To fix this issue, Kyle recommended lifting the slabs with PolyLevel and sealing the joints with NexusPro. After looking over Kyle's recommendations, the homeowner happily agreed and decided to move forward with the project.

In about a month, our Foreman, Patrick B., and his crew arrived at the home to lift the concrete slabs. The crew began by drilling small holes along the concrete slabs before injecting PolyLevel. Once the slabs have been lifted so that it is level, the crew seals the holes and begins applying NexusPro along the joints. After they were done with the installation, the crew cleaned up their equipment and left the home.

Now, our customer can have peace of mind with his smooth and level driveway! Are you experiencing something similar? Click HERE to schedule your no-obligation, FREE concrete estimate!

In Anoka, MN, a store owner of a cabinet store had noticed that the concrete floor had become uneven, making it difficult to cut wood and move items in the area. Knowing the concrete is in good condition and not wanting to replace it, the store owner began looking into concrete lifting in Anoka, MN, and found us. The store owner then contacted us to schedule his FREE estimate.

In less than a week, our Design Specialist, Justin M., arrived at the store to conduct a thorough inspection. He took a close look at the areas that showed settlement and recommended PolyLevel, our elite foam solution, to lift the floor back to its original position. The store owner happily agreed to Justin's recommendation and decided to move forward with the project

In several weeks, our Concrete Field Technician, Tyler B., and his crew arrived at the home for the installation. The crew drilled small holes into the concrete slabs and injected PolyLevel beneath the slab. Once it has been lifted, the crew seals the holes. 

Now, our customer can have a level concrete floor! Experiencing something similar? Click HERE to schedule your FREE estimate today!