Radon Gas Mitigation Before & After Photos

A homeowner from Zumbrota, MN, had recently learned about the dangers of radon gas and the hazards it poses to a household. He was afraid that his loved ones were being exposed to this hazardous gas, so he decided to find a radon mitigation specialist in Minnesota. After finding our website, he looked through our radon gas mitigation pictures and decided to claim his FREE estimate. Several weeks later, our Design Specialist, Mac C, was headed out to the home. 

When Mac arrived, he discovered that the homeowner had conducted an at-home radon test, which indicated higher-than-normal levels. So, Mac began his process by scouting out the best location for a mitigation system. When he was finished, he met with the homeowner. He began by saying that the homeowner was right to call us, explaining that radon is invisible, odorless, colorless, and tasteless, making it completely undetectable without proper testing. Mac went on to say that because the levels in the home were so high, he recommended a radon mitigation system. He explained that a typical radon mitigation system consists of a large-diameter plastic pipe that connects the air beneath your foundation to the outdoors. An in-line fan sucks radon-rich air from beneath your foundation and expels this hazardous air to the exterior. Instead of entering your basement or other living space area through numerous gaps and cracks in the foundation, radon gas is extracted from beneath your foundation before it can permeate into interior space. The homeowner liked the sound of Mac's approach and signed on the spot. 

When the day of the project rolled around, our Foreman, Dakota, led his team through a flawlessly executed radon mitigation system installation. 

A homeowner in Birchwood, WI, recently read an article discussing the dangers of radon. Concerned about their home's radon levels, the homeowners knew they needed to find a company that could provide them with a solution. The homeowner looked into a "radon mitigation company near me" and one of the first companies to show up was us, American Waterworks. After reading about our radon abatement systems, the homeowner knew we were the ideal company for their project. Since they were already on the website, the homeowner decided to sign up for their FREE estimate. After the estimate was set, we sent one of our Design Specialists, Kyle, to the home to provide the homeowner with some answers. Kyle arrived at the home and then placed a radon test in the home. While the test was completed, Kyle found the best areas to place the Radon Mitigation System. After the test was completed, it showed the results were above 4.0pCis. Kyle recommended installing our Radon Mitigation System in the home. Knowing this was their best option, the homeowner agreed with Kyle's recommendations. Next, the proposal was passed to our Logistics team to build and approve the project. Our Logisitcs team gave the final stamp of approval, then it was scheduled for a few weeks later. Once the project date arrived, our Foreman, Dakota, and his crew traveled to the home to begin the installation. First, Dakota and his crew made sure the home was ready for installation. Next, Dakota and his crew installed the Radon Mitigation System. Once the Radon Mitigation System was secured, Dakota and his team cleaned up their materials and left the home. The homeowner was relieved to know their home's radon levels were at a safe level. American Waterworks is happy to provide their homeowners peace of mind knowing their home is secure. 

Sandra N. in Albert Lea, MN had her home tested for radon. When the results came back with high levels, she gave American Waterworks a call. Our Design Specialist, Reed Hudson, developed a plan that was unique to her home. 

Our Foreman, Dakota Merchlewitz, started the installation process by drilling a hole in the slab foundation of the home and connected a PVC pipe. The radon gas is drawn upward, and the pipe guides it to the fan. The fan draws and vents radon safely above and away from the home. Sandra is glad she took the necessary steps to protect herself and her family. 

Have you had your home tested for radon? Click here to set up an appointment!

Robert K. of Albert Lea, MN got his home tested for radon and his levels came back at 19.5 pCi/L. The Environmental Protection Agency requests that homes with above 4 pCi/L must take action right away. So, Robert did, and he called American Waterworks to set up an appointment after finding out we provide services for Radon Mitigation. Our Design Specialist, Michel, went to Robert's home and drew up a map and plan to install our Radon Mitigation System. Robert was confident in the price and product, so he went ahead with the installation. 

Our Foreman, Geno, and his crew member started the installation by drilling a hole in the basement concrete floor, forming a suction point. The purpose of doing this is to pull radon out from underneath the home. From there, our team connected PVC piping until they got to the house exterior, where they installed the Radon Mitigation System. The system is the heart of the system. If the system isn't working, then radon is not escaping from the home. From there system, our team connected PVC piping along the siding of the home until they got to the roof, which is where radon escapes into the open air. Robert said our team was clean, they explained everything well, and they were very professional! 

Give us a call today to test your radon levels and to install our Radon Mitigation System! 

A homeowner from Albert Lea, MN, was chatting with his neighbor one day when he learned his neighbors had their home tested and mitigated for radon gas. The homeowner didn't know much about the dangers of radon gas but decided to find a specialist in the area to ease his concerns. When he found our website, he was impressed with the previous radon systems we had installed in his area and decided to claim his FREE estimate. Several weeks later, Brad W, one of our Design Specialists, was headed to the home. 

When Brad headed out to the home, the first step in his process was to place a continuous radon monitoring test in the lowest level of the home. Brad explained that the point of the test is to record the levels of radon in the home over a 48-hour timeframe, and at the end, deliver the average level of radon within the home. Brad went on to say that if the test came back with a level higher than 4 pCi/L, he would strongly urge the homeowner to consider installing a radon mitigation system. Brad explained that a typical radon mitigation system consists of a large-diameter plastic pipe that connects the air beneath your foundation to the outdoors. An in-line fan sucks radon-rich air from beneath your foundation and expels this hazardous air to the exterior. Instead of entering your basement or other living space area through numerous gaps and cracks in the foundation, radon gas is extracted from beneath your foundation before it can permeate into interior space. The homeowner liked the sound of Brad's plan but decided to wait until the radon results returned. When the test results came back, they were well above the recommended 4 pCi/L, so the homeowner and Brad worked together to find the right date for the installation. 

On the day of the project, our Foreman, Geno M, and his team were able to effortlessly install the mitigation system in the home. Now, our customer can breathe a bit easier knowing that his home is only circulating the cleanest air!