Concrete Leveling Before & After Photos

A homeowner from Maple Grove, MN, had been aware of her front concrete walkway slowly settling over the years. She feared that if she let the problem worsen, it might be more costly to fix down the road. She had no idea who to turn to for concrete repairs near Maple Grove, MN. She hopped on the internet and eventually found our website. She was impressed with our past work in the area, so she signed up for her FREE estimate, and several weeks later, our Design Specialist, Gary, headed out to the home. 

Gary inspected the concrete, and when he finished his inspection, he informed the homeowner that we could address the sinking concrete with the help of our PolyLevel injection. PolyLevel is a dense polyurethane foam that expands when it's injected beneath concrete slabs. It slowly fills voids left by soil erosion and, in the process, lifts the concrete back to it's desired location. Gary went on to say that he recommended sealing off the concrete with our NexusPro. This silicone-based sealant gets applied directly to the cracks and joints in the newly lifted concrete and acts as a barrier to keep unwanted moisture out. The homeowner agreed with Gary's recommendations and scheduled the job on the spot. 

On the day of the project, our Foreman, Dylon V, headed out to the home and was able to complete the lift and seal with no complications. Now, our customer can put her worries about her concrete behind her! 

A homeowner in Maple Grove, MN, tripped while walking into their home one evening. Concerned this could turn into a major tripping hazard, the homeowner knew they needed to find a solution. Hoping to avoid total concrete replacement, the homeowner looked into "concrete repair specialist near me". At the top of the recommendations was us, American Waterworks. Impressed with our high ratings and reviews, the homeowner knew we were the ideal company for their project. Since they were already on our website, the homeowner decided to sign up for their FREE estimate. Once the estimate was set, the homeowner prepared for the arrival of our Design Specialist. A few weeks later, the Design Specialist arrived at the home and began the thorough inspection of the exterior concrete. During the inspection, the Design Specialist discovered the concrete was sinking due to settlement. To prevent the settlement from continuing, the Design Specialist recommended inserting PolyLevel underneath the struggling sidewalk. After hearing the benefits of the PolyLevel, the homeowner knew this was the best solution. Next, the Design Specialist passed the proposal to our Logisitcs team to give the final stamp of approval. Our Logistics team built and scheduled the project for the following weeks, then it was assigned to our Foreman, Jordan, and his crew. A few weeks later, Jordan and his crew traveled to the home to begin the installation. First, Jordan and his crew started by installing PolyLevel, a polyurethane foam injection solution, underneath the struggling sidewalk. Once the PolyLevel was fully installed, the crew shifted to inserting NexusPro in the cracks and joints of the sidewalk. After all the cracks and joints were repaired, the crew cleaned up their materials and left the home. The homeowner was glad they avoided concrete replacement. American Waterworks is happy to repair its customers' damaged and sinking concrete. 

A homeowner in Maple Grove, MN, had noticed the concrete slabs in their walkway had begun sinking, causing it to lean onto one side. Knowing the issue would worsen without a proper solution, the homeowner contacted us to schedule their FREE estimate. 

In less than a week, our Design Specialist, Kyle P., arrived at the home to assess the concrete. During the inspection, Kyle took a close look at the concrete slabs and identified the areas that would need lifting and leveling. After reporting his findings, Kyle recommended lifting the slabs with PolyLevel, sealing the joints, and repairing the cracks with NexusPro. Not wanting to go through the mess of mudjacking, the homeowner happily agreed to the recommendations.

In about a month, our Foreman, Bryce P., arrived at the home for the installation. Once the slabs had been successfully lifted and leveled and the crew had applied NexusPro, they cleaned up their equipment and left the home.

Now, our customer can have peace of mind with a level walkway! Schedule your FREE estimate today by clicking HERE!

A homeowner in Maple Grove, MN, noticed the walkway to their front door was sinking significantly. Unsure of the cause, the homeowner knew they needed to find an expert to provide them with a solution. The homeowner looked into "concrete lifting company Maple Grove, MN," and one of the first companies to grab their attention was us, American Waterworks. Impressed with our stellar ratings and reviews, the homeowner knew that we were the ideal company for their project. Since they were already on our website, the homeowner decided to sign up for their FREE estimate. Once the estimate was set, we sent one of our Design Specialists, Justin, to the home to take a closer look. Justin promptly arrived at the home and began the thorough inspection of the exterior concrete. During the inspection, Justin noted that several areas were suffering from settlement. To prevent the settlement from continuing, Justin recommended installing PolyLevel below the sinking slabs. Knowing this was the best plan of action, the homeowner agreed and worked with Justin to find the best installation date. When the installation date arrived, our Foreman, Dylon, and his crew traveled to the home to begin the installation. First, Dylon and his crew began by inserting PolyLevel below the sinking slabs. Once the PolyLevel was secured, the crew repaired the old joints and cracks with NexusPro, a silicone-based sealant. After all the products were installed, the crew cleaned up their matierals and left the home. The homewoner was grateful for the excellent work completed by the crew. American Waterworks is happy to provide its customers with peace of mind. 

A customer from Maple Grove, MN got in contact with us when they began to notice that their front walkway was showing signs of sinkage. They were afraid that if they left the problem alone they would run the risk of creating even more drastic tripping hazards which could result in injury. When they called in we set them up with our FREE estimate. Once the appointment was booked, our Design Specialist, Brian R, headed out to the property. Once Brian completed his walkthrough he informed the homeowner that the reason they were experiencing the sinkage was because of the soil underneath the concrete slabs. He recommended the use of our PolyLevel injection to fix the issue. He explained that our PolyLevel is an expanding polyurethane foam that expands once it's injected beneath the concrete through small holes on the surface. Our customer agreed with this plan of action and work began once the weather warmed up. 

Our PolyLevel Production crew, led by our Foreman, Sam, began the process by strategically drilling holes into the problem concrete. Next, they slowly injected the PolyLevel into the holes, monitoring the lifting process to ensure the slab returned to its former state. They finished the process by sealing all remaining joints and cracks with our NexusPro to ensure that no unwanted water would get beneath the slab in the future. 

Once the job was complete our homeowner was happy to know that they didn't have to worry about any tripping hazards in the future!