Concrete Leveling Before & After Photos

A homeowner from Maple Grove, MN, had been aware of her front concrete walkway slowly settling over the years. She feared that if she let the problem worsen, it might be more costly to fix down the road. She had no idea who to turn to for concrete repairs near Maple Grove, MN. She hopped on the internet and eventually found our website. She was impressed with our past work in the area, so she signed up for her FREE estimate, and several weeks later, our Design Specialist, Gary, headed out to the home. 

Gary inspected the concrete, and when he finished his inspection, he informed the homeowner that we could address the sinking concrete with the help of our PolyLevel injection. PolyLevel is a dense polyurethane foam that expands when it's injected beneath concrete slabs. It slowly fills voids left by soil erosion and, in the process, lifts the concrete back to it's desired location. Gary went on to say that he recommended sealing off the concrete with our NexusPro. This silicone-based sealant gets applied directly to the cracks and joints in the newly lifted concrete and acts as a barrier to keep unwanted moisture out. The homeowner agreed with Gary's recommendations and scheduled the job on the spot. 

On the day of the project, our Foreman, Dylon V, headed out to the home and was able to complete the lift and seal with no complications. Now, our customer can put her worries about her concrete behind her! 

A company in Cologne, MN had a sunken concrete pad that was supporting a 10,000-pound electrical transformer. It had settled three inches, and the company owner was in search of the best and most cost-effective solution. He came across American Waterworks and our concrete repair solutions, so he got a FREE Estimate scheduled with our Design Specialist, Kevin. Kevin went to the property, inspected the concrete, and determined a solution that worked for them and their needs. After a thorough inspection, Kevin proposed our PolyLevel, which is a polyutherane foam that fills the voids under the concrete and stabilizes the surface. The company owner was satisfied with the quote and solution, so they moved forward with the project. 

Our Foreman, Brandon, and his crew member injected 33 pounds of our PolyLevel underneath the concrete pad. Our PolyLevel quickly restores the appearance and safety of the concrete, without the mess or cost of replacement or mudjacking. It is also adjustable for loads of all sizes and can be utilized within 15 minutes of injection. The company owner was happy with the repairs and had a great experience from start to finish! 

At American Waterworks, we provide services in basement waterproofing, foundation repair, crawl space repair/encapsulation, radon testing/mitigation, and concrete repair/lifting. Call us today or click HERE to request your free estimate! 

Lee and Betty O. of Medina, MN had cracked concrete on their porch and wanted it repaired rather than replaced. After doing some research on our website and getting a hold of us for a FREE Estimate, our Design Specialist, Rick Weber, went to their home to inspect the problem and come up with a solution. Lee and Betty were content with Rick's concrete repair proposal, so they went ahead with the project. 

Our Foreman, Troy Johnson, and his production team began the project by injecting our PolyLevel underneath the concrete to stabilize and raise it's surface. Next, our team applied our NexusPro on the cracks to prevent any further bubbling or cracking. It gives the concrete and nice, clean look and provides long-term flexibility. The work was completed within a couple hours, and Lee and Betty were able to use their concrete that same day! They were thrilled with the outcome. 

Wajih from Hamel, MN, got in contact with us when they began to notice that a gap forming between their front stair and the concrete walkway leading up to it. They were afraid that if they didn't correct the issue, it would begin to worsen and the tripping hazard would get worse. When they called us, we set them up with our FREE inspection. After our inspection visit was scheduled, our Design Specialist, Jarrett, headed out to the property for a standard 3-hour inspection into the issue and what we could do to help. Once he completed his walkthrough, he made some recommendations as to how we could best help Wajih. First, Jarrett wanted to lift and level the concrete slabs using our PolyLevel injection. Then he wanted to follow up and seal the project with NexusPro to seal off any remaining cracks. The homeowner agreed and work began shortly after. 

Our team, led by our Foreman, Dylon, began the process by strategically drilling holes into the problem slabs. Next, they injected the PolyLevel into the holes and monitored the raising process. Our PolyLevel is an expanding polyurethane foam that, when injected below concrete, fills the voids below the slab caused by soil erosion. Next, they followed the PolyLevel with our NexusPro, a silicone-based sealant for joints and cracks that is specially formulated to provide long-lasting flexibility and to stand up against harsh weather conditions. 

When the job was complete, Wajih was content knowing that their concrete slabs wouldn't be sinking anymore anytime soon!

Ann S. of Saint Bonifacius, MN had uneven concrete near her front porch, causing safety concerns. She did research on our website and filled out our online FREE Estimate form. Our Design Specialist, Jeremy Radtke, went to her home to inspect the issue and come up with a solution. Ann got all of her questions answered, so she followed through with the project. 

Our Foreman, Brandon Wiskow, and his crew member drilled holes in the concrete and injected our PolyLevel into each hole to raise and stabilize the concrete surface. Our PolyLevel is a dense foam that cures within minutes. Brandon and his crew member had the project completed in one day, and made sure Ann was happy with the work!